Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna

OVERHAULING THE WHEELSDEFORMATION RIMWHEEL SPOKESThe tables hereunder show the type of control the rim andwheel axle are to be submitted to.Note*: if the rim is badly, it should be replaced.Side skidEccentricitySTANDARDless than 0,5 mm(0.02 in)less than 0,8 mm(0.03 in)MAX.LIMIT2 mm(0,078 in)Check to make sure that all the nipples are tight; tighten themif necessary.Remember that an insufficient stretch jeopardizes the motorcyclestability.For an instant check, use a metal point (for instance, a screwdriver)to beat the spokes with. A live sound accounts for an accuratetightening, while a dull sound means that a new tighteningis necessary.ENWHEEL RIM AXLE BENDINGIf the bending figure is over the allowable max. limit, straightenor replace the axle.If the wheel axle cannot be straightened within the max. limits(0,2 mm - 0,008 in.) stated, replace it.69