Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna

WARNING!Brake fluid quickly ruins painted surfaces;any spilled fluid should be completelywiped up immediately.* Brake fluid may cause irritation. Avoidcontact with skin or eyes. In case of contact,flush thoroughly and call a doctor if youreyes were exposed.Periodically check the connecting hoses (see“Periodical maintenance card”): if thehoses (A) and (B) are worned or cracked,their replacement is advised.FRONT BRAKING SYSTEM BLEEDING(TE, TC, TXC)The braking system must be bled after the fluid replacement orwhen, due to air in the circuit, the lever stroke is long andspongy.Proceed as follows:- Remove the rubber cap on the bleeding valve (1).- Attach a clear plastic hose to the bleeding valve on the brakecaliper and turn the other end of the hose into a container(make sure that the end of the hose is submerged in brakefluid during the entire bleeding operation).A1BTE-TC-TXC62