Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna
Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna
Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OIL FORK LEVELFor the regular fork operation, both legs must be providedwith the necessary oil quantity. <strong>TE</strong>: remove the forkrods formthe fork to check the oil level inside the forkrods. Work as follows:- remove the power rod caps;- remove springs from the stems letting the oil drop into thelatter;- bring forks to stroke end;- check that the level is at distance of 5.51in below the upperlimit of rods.NO<strong>TE</strong>Flexibility index for the serial springs:K=8.8 N/mm (<strong>TE</strong>)K=9.6 N/mm (<strong>TC</strong>-<strong>TXC</strong>)NO<strong>TE</strong>Always replace both the spring and the spacers to keep thepreload value unchanged.ENOIL QUANTITY IN EACH FORK LEG- <strong>TC</strong>-<strong>TXC</strong>: 352 cm 3 (21.5 cu. in.)- <strong>TE</strong>: 643 cm 3 (39.2 cu. in.)a) b)ACD<strong>TE</strong><strong>TE</strong>45
Change language