Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna

OIL FORK LEVELFor the regular fork operation, both legs must be providedwith the necessary oil quantity. Remove the forkrods form thefork to check the oil level inside the forkrods. Work as follows:- remove the power rod caps;- remove springs from the stems letting the oil drop into thelatter;- bring forks to stroke end;- check that the level is at distance “A” below the upper limitof rods.NOTEFlexibility index for the serial springs:K=4,8 N/mm (TE)K=5 N/mm (SMR)NOTEAlways replace both the spring and the spacers to keep thepreload value unchanged.ENOIL QUANTITY IN EACH FORK LEG- TE: 725 cm 3 (44.2 cu. in.)- SMR: 740 cm 3 (45.1 cu. in.)A=100mm (3.94 in.) - SMRA=120mm (4.72 in.) - TEA43