Owner's Manual 2010 TE/TC/TXC 310/450/510 - Husqvarna

ENGINE START (TXC)Make sure the fuel tap is in the OPEN position, then shift gearpedal in neutral position.Pull the starter knob (BLACK knob (2) for cold starting*, REDknob (3) for warm starting), pull the clutch control lever,then press the engine start button (1).Release the clutch control lever.*: after a prolonged inactivity of the motorcycle or in presenceof a low external temperature.STARTING DECOMPRESSORThough the engine is provided with an automatic decompressor,can be necessary, in some cases (carburetor flooding or startingdifficulties due to a battery inadequate charge), to use the manualstarting decompressor on the L.H. side of the handlebar. Inthese cases, pull the lever (5) whilst simultaneously pressingthe starter button, release the lever (5) keeping the buttonpressed and afterwards release the latter as well.In order to adjust the lever decompressor free play (approximately3 mm- 0.12 in.), the lever holder is provided with the adjuster (6);the adjustment can be also effected with the tightener (7) on theR.H. side of the engine (use this tightener if it is not possible to obtainthe correct free play with the adjuster on the handlebar).23TXC122