Heat Alarm - Ei Electronics

Heat Alarm10 YEAR LITHIUM CELL POWEREDModel Ei 603TYC HEAT AlarmCommunication CapabilityPractically eliminates false alarmsSuitable for Kitchens & areas where smoke alarmsmay be subjected to false alarms.Aesthetically pleasing, compact designBattery capacity is sufficient to outlast the usefullifespan of the alarm.Large Easy to use Test buttonInterconnect up to 12 battery powered alarmsEasy to fit twist-on baseOptional upgrade to enable RadioLINKinterconnect Kitemarked to BS 5446-2:2003 Manufactured in Ireland to ISO 9001:2000Product DescriptionThe Ei603TYC alarm is activated by heat from a fire, notsmoke, which makes it ideal for kitchen installations wheresmoke detectors are prone to nuisance alarms.The Ei603TYC has a 10 Year Lithium battery that is nonreplaceable.The Ei603TYC should always be interconnected to othersmoke alarms in the dwelling or escape routes to ensurethat all occupants are alerted to the danger.The Ei603TYC modular design allows it to be upgraded forRadioLINK functionality with the addition of an RF module.Up to 12 battery powered smoke and heat alarms may belinked using hardwire or RF connectivity.RadioLINK enabled smoke and/or heat alarms can behouse coded as a system to prevent communication withother nearby RadioLINK systems.OperationThe heat detector will alarm when the temperaturereaches 58 0 C. It will automatically reset and silencethe alarm when the temperature drops below thislimit. The red indicating LED will flash once every 40seconds to show that the alarm is powered and ithas performed an automatic power supply test..The built in sounder will provide a minimum soundoutput of 85dB(A) @ 3m.Pressing and holding the “Test” button will check thesensor, electronics and sound the horn.The alarm is not powered until it is twisted on themounting base, thus avoiding battery powerconsumption during storage and prior to installation.When used in a RadioLINK configuration, Ei603TYCheat alarms and other RadioLINK smoke alarmsmust be house coded. This will avoid interferenceand interconnection with other RadioLINK systems.Keep all doors closed to rooms with heat alarms atnight and while premises are unoccupied.Shannon Free Zone, Shannon, Co. Clare, Ireland.Ph.+353 61 471277 Fx.+353 61 471053Email. eielectronics@eiltd.ieWeb: www.eielectronics.comE & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei603TYC 131010

Model Ei603TYC HEAT AlarmTechnical SpecificationSensor:Fast response thermistor (classA1) with threshold set to 58 o CAlarm:Piezoelectric-hornAlarm Sound Output: 85dB (A) (minimum) @ 3mButton Test:Pressing the test button tests thesensor, electronics and horn.Normal OperatingTemperature Range:0 to 40 o CBattery Voltage:9V supplied by 10 Year LithiumBattery with 2,000mAh capacity.Humidity Range:15% to 95% Relative Humidity(non-condensing)Power-On Indicator:Alarm Indicator:Red LED flashes through coverevery 40 secondsRed LED flashes rapidly on thealarm sensing the fire and thesounder is activated. The sounderson all interconnected alarms arealso activated.HardwireInterconnect:RadioLINKInterconnect:Fixing:Dimensions:Interconnect up to12alarms and remote control devicesOptional Interconnect for up to12battery powered RadioLINK readyalarms and remote control devicesScrew fixings supplied115mm (diameter) x 55mm(height)Weight:200 gramsWarranty:5 year (limited) warrantyCompliance:Kitemark to BS 5446-2:2003 , CEapproved,Manufactured to ISO 9001:2000quality standards.Shannon Free Zone, Shannon, Co. Clare, Ireland.Ph.+353 61 471277 Fx.+353 61 471053Email. eielectronics@eiltd.ieWeb: www.eielectronics.comE & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei603TYC 131010