Motorola CP100 Two-Way Radio Operations Manual.pdf

3. Turn on the target radio and place it directly behind the sourceradio in the MUC.4. Press and hold Q on the source radio. The source radio entersCloning Mode and transmits its settings to the target radio. EitherW for pass or N for fail appears on the source radio and the targetradio displays all icons if cloning was successful.5. Turn the target radio off and back on again to use.6. To clone additional radios, repeat steps 3 and 5.7. Exit k on the source radio by holding down M.Note: You can clone only one radio at a time.Source radioTarget radiok218The MUC does not need to be plugged in for Cloning feature to work.Radios must be of the same band; UHF or VHF. Also, multi-channel modelscan clone to single-channel radios, but only the first channel is cloned.188Programming Features27