Motorola CP100 Two-Way Radio Operations Manual.pdf

Programming FeaturesEditing the Scan List (15 ch models only)To avoid hearing transmissions from unnecessary channels while scanning and todecrease scan time, you can edit the scan list to skip unneeded channels.1. Enter Programming Mode as necessary, refer to “Entering Programming Mode”on page 20.2. Press \ until h displays and the channel and Y or n flashes.3. Press [ or ] to increase or decrease the channel.4. Press J to display either:Y to include the channeln to exclude the channel5. Press and hold M to exit k.CloningYou can duplicate CP100 radio settings from one radio to another by using theoptional accessory NNTN4028 Multi-Unit Charger (MUC). Please refer to the MUCUser's Guide included with this accessory.1. To enter the Programming Mode on the source radio, press and hold MQ forthree seconds while turning on your radio. The radio beeps and displays k.2. Place the source radio in one of the front pockets of the MUC.26