Motorola CP100 Two-Way Radio Operations Manual.pdf

Table of ContentsProduct Safety and RF ExposureCompliance ...............................iIntroduction...................................1FCC Licensing Information..........3Getting Started..............................5Installing the Swivel BeltHolster ....................................5Installing the Nickel-MetalHydride Battery .......................6Charging the CP100 Radio ........7Turning Your Radio On or Off .....8Adjusting the Volume ..................8Using the Radio ..........................8Understanding the Display........10Battery and Charging Options ..11NiMH Battery.............................11Alkaline Batteries ......................11Charging with the Drop-inCharging Tray (NNTN4019)...12Reading the Battery Meter........13Battery Life................................13CP100 Factory Defaults .............14Talking and Receiving ............... 15Signal Strength Indicator/Channel Busy........................ 15Talk Range............................... 15Keypad Lock............................. 16Hands-Free Use/VOX .............. 16With Compatible VOXAccessories........................... 16Without Accessories................. 17Setting VOX Sensitivity ............ 17Monitoring a Channel ............... 18Scanning (15 ch models only) .. 18Programming Features.............. 20Entering Programming Mode ... 20Programming a Channel(15 ch models only)............... 21Programming the Frequency.... 21Programming the InterferenceEliminator Code..................... 22Assigning Channels to Presets(15 Ch Models Only) ............. 22Programming the ScrambleFeature.................................. 23Programming Bandwidth (whenFCC allowable)...................... 231