Motorola CP100 Two-Way Radio Operations Manual.pdf

Programming FeaturesProgramming the Interference Eliminator CodeThe Interference Eliminator Code helps minimize interference byproviding you with code combinations, which filter out static, noise,and unwanted messages.1. Enter Programming Mode as necessary, refer to “EnteringProgramming Mode” on page 20.2. Press \ until the Interference Eliminator Code display numberbegins to flash.InterferenceEliminatorCode3. Press [ or ] to select the desired Code (See “Interference Eliminator Codes”beginning on page 37).4. Press and hold M to exit k, or press \ to continue.Assigning Channels to Presets (15 ch models only)Presets allow you to easily switch to more frequently-used channels.1. Enter Programming Mode as necessary, refer to “Entering Programming Mode”on page 20.2. Press [ or ] to select the desired channel.3. Press and hold T or S to assign that channel to a preset, radio beeps toconfirm. All of the channel settings are assigned to that preset button.4. Press and hold M to exit k, or press \ to continue.0107522