Motorola CP100 Two-Way Radio Operations Manual.pdf

Programming a Channel (15 ch models only)Each channel has its own Frequency, Interference Eliminator Code, Scramble Code,and Bandwidth Settings.Program each channel separately.1. Select the channel that you will be programming.2. The channel number flashes. l and code displaysalternately.63. Press [ or ] to select the desired channel.4. Press and hold M to exit k, or press \ to continue.Programming the FrequencySets the frequency that your radio will use. As you are matching yourCP100 radio to existing SP21 radios, enter Programming Mode asnecessary, refer to page 20.1. Press \to display l. The frequency flashes.2. Press [ or ] to select the desired frequency (See“Frequencies and Bandwidths” beginning on page 34).3. Press and hold M to exit k, or press \to continue.Programming Features21