Motorola CP100 Two-Way Radio Operations Manual.pdf

Programming FeaturesProgramming FeaturesYou can change the following features by entering the programming mode (k).To talk with someone on your two-way radios, these settings must match:• Channel (15 ch models only)• Frequency• Interference Eliminator Code• Scramble code• Bandwidth (for optimal clarity)You can also use k to set the following:• Call tones• Microphone Gain• Scan List (15 ch models only)• Available channels (15 ch models only)Note: You cannot enter kwhile a VOX accessory is plugged into the radio.Entering Programming ModeYou must enter Programming Mode to change your communication settings.1. Press and hold MJ for three seconds while turning on yourradio. The radio beeps and displays k.120