Motorola CP100 Two-Way Radio Operations Manual.pdf

Monitoring a ChannelCheck for channel activity.1. Press and hold Q. You will hear static if the channel is clearand w 0 will display.2. Press Q again to release.Talking and Receiving18Scanning (15 ch models only)You can scan up to 15 channels and frequencies. When the radio detects activity, itstops scanning and locks in on the active channel. This allows you to talk and listento the person transmitting without changing channels.1. To start scanning, briefly press J. Your radio displays h and begins to scrollthrough channels. When the radio detects channel activity, it stops on thatchannel and displays the signal strength indicator and the channel. You can talkto the person(s) transmitting without having to switch channels by pressing M . Ifyou press M while the radio is scanning, the radio transmits on the channel youselected before you activated scan.2. To stop scanning, briefly press J.If no transmission occurs within five seconds, scanning resumes.To scan a channel without interference eliminator codes, change the code for your setchannel to 0 before you press and release J.Note: When you press J, you hear all traffic, but may not be able to transmit backbecause the other person(s) may be using codes.