Motorola CP100 Two-Way Radio Operations Manual.pdf

More documents

Recommendations

Info

Keypad Lock1. To maintain settings and lock keypad, press and hold \for three seconds.2. To unlock, press and hold \for three seconds.Talking and Receiving16Hands-Free Use/VOXMotorola CP100 radios can operate hands-free (VOX) when used with compatibleVOX accessories. A short delay occurs between when you start talking and the radiotransmits.With Compatible VOX Accessories1. Turn radio off.2. Open accessory cover.3. Insert plug of audio accessory firmly into accessory jack.4. Turn radio on. Radio displays: g. If flashing and forinitial use, please refer to "Setting Vox Sensitivity" onpage 20.5. Lower radio volume BEFORE placing accessory near ear.6. To transmit, speak into accessory microphone and toreceive, stop talking.7. You can disable VOX operation by pressing Morremoving the audio accessory.Note: To order accessories, call 1 (800) 422-4210, or contact your point ofpurchase.CP100
Without AccessoriesYou can operate a CP100 15 channel radio hands-free without a VOX accessory.1. Enable VOX by pressing M while turning the radio on. g displays.2. You can disable VOX operation temporarily by pressing M, g will flash.3. A short press of M will re-enable VOX.4. To disable VOX, turn radio off then back on.Setting VOX SensitivityYou can adjust the sensitivity of your radio’s accessory or microphone during VOXoperation (15 ch models only) to suit different operating environments. These menusappear only if the VOX feature is in use, which is indicated by g.1. Press \until g appears. The radio also displays which VOX sensitivity you aresetting:H = External VOX (with audio accessory)I = Internal VOX (without accessory; 15 ch models only)H2. Press [ or ] to select the sensitivity level.30 = Off (VOX with accessories only, default settings)External VOX1 = Low sensitivity2 = Medium sensitivity3 = High sensitivityTalking and Receiving17
Page 1: CP100CP100Commercial SeriesTwo-Way
Page 4 and 5: 2Programming the Available Channel(
Page 6 and 7: Product Safety and RF Exposure Comp
Page 8 and 9: For a copy of a large-print version
Page 10 and 11: FCC Licensing InformationChanges or
Page 12 and 13: Getting StartedInstalling the Nicke
Page 14 and 15: Getting Started8Turning Your Radio
Page 16 and 17: Understanding the DisplayScan(15-Ch
Page 18 and 19: Battery and Charging OptionsChargin
Page 20 and 21: CP100 Factory DefaultsYour CP100 ra
Page 24 and 25: Monitoring a ChannelCheck for chann
Page 26 and 27: Programming FeaturesProgramming Fea
Page 28 and 29: Programming FeaturesProgramming the
Page 30 and 31: Programming Features24Note: Spirit
Page 32 and 33: Programming FeaturesEditing the Sca
Page 34 and 35: Advanced FeaturesAdvanced FeaturesY
Page 36 and 37: TroubleshootingSymptomNo PowerTry T
Page 38 and 39: SymptomTry This:TroubleshootingLow
Page 40 and 41: Frequencies and Bandwidths34Frequen
Page 42 and 43: UHF Frequencies (Continued)Frequenc
Page 44 and 45: Digital Interference Eliminator Cod
Page 46 and 47: Frequencies and BandwidthsVerifying
Page 48 and 49: Motorola Limited Warranty42IV. What
Page 50 and 51: Motorola Limited WarrantyFlat-rate
Page 52 and 53: Motorola Limited WarrantyIX. State
Page 54 and 55: Motorola Limited WarrantyExport Law
Page 56 and 57: Index50AAudio accessories .........
Page 58 and 59: IndexRF Exposure...................
Page 60: CP100 Programming Quick ReferenceRa

Motorola CP100 Two-Way Radio Operations Manual.pdf

Create successful ePaper yourself

Delete template?

Save as template?