Motorola CP100 Two-Way Radio Operations Manual.pdf

Getting StartedInstalling the Nickel-Metal Hydride BatteryYour radio is powered by an NiMHbattery, which provides up to 15 hours*of usage. Before you install the battery,mark the date in the "INSTALL DATE"section with a permanent marker. As invehicles, all rechargable batteries losecapacity over time.1. Push and hold down the ribbedlatch on the bottom of the radiotoward the contacts, then slide andlift the battery door off.2. With the Motorola logo side up, andthe charge contacts facing thebottom of the radio, insert the top ofthe battery into the radio.3. Push the battery up and into thebattery compartment to fit tightlyinto place.4. Slide and snap the battery door intoplace.*Based upon 5% transmit/ 5% receive/90% standby (standard duty cycle).21RibbedLatch6