linear system - Profilex sa

LINEAR BEARINGS TANDEM LINEAR BEARINGS WITH FLANGETANDEM LINEAR BEARINGS WITH FLANGEKBF...WKBF...GWKBK..WKBK...GWCircular flange with steel retainerCircular flange with resin retainerSquare flange with steel retainerSquare flange with resin retainerUU = seals on both sidesAlso available in stainless version, material 1.4125.Designation: KBSF...W, KBSK...W, KBSK...GWAdvantage: exact geometry, no housing necessary, easy assembly and changing, direct assembly in main frame possibe, increasedstiffness, load capacity and guiding accuracy.This unit KBK...W is useful for very small installation space.Shaft Designation Weight Major dimensions and tolerancesØ Steel retainer Resin retainer d r D Lmm kg mm Tol.m mm Tol.m mm Tol.m81216202530405060KBF 08 W KBF 08 GW 0,059KBK 08 W KBK 08 GW 0,051KBF 12 W KBF 12 GW 0,11KBK 12 W KBK 12 GW 0,09KBF 16 W KBF 16 GW 0,16KBK 16 W KBK 16 GW 0,135KBF 20 W KBF 20 GW 0,26KBK 20 W KBK 20 GW 0,225KBF 25 W KBF 25 GW 0,54KBK 25 W KBK 25 GW 0,5KBF 30 W KBF 30 GW 0,815KBK 30 W KBK 30 GW 0,72KBF 40 W KBF 40 GW 1,805KBK 40 W KBK 40 GW 1,6KBF 50 W KBF 50 GW 2,82KBK 50 W KBK 50 GW 2,62KBF 60 W KBF 60 GW 4,92KBK 60 W KBK 60 GW 4,488 +9/-1 16 0/-13 46 +/-30012 +9/-1 22 0/-16 61 +/-30016 +11/-1 26 0/-16 68 +/-30020 +11/-1 32 0/-19 80 +/-30025 +13/-2 40 0/-19 112 +/-30030 +13/-2 47 0/-19 123 +/-30040 +16/-4 62 0/-22 151 +/-30050 +16/-4 75 0/-22 192 +/-30060 +16/-4 90 0/-25 209 +/-30028 MINITEC LINEAR SYSTEM