linear system - Profilex sa

LINEAR BEARINGS STANDARD LINEAR BEARINGSSTANDARD LINEAR BEARINGSLME...with resin retainerMiniTec linear bearings in the LME series have been designed from the strictest of cost standpoints. The user thus has the possibilityof creating extremely cost-effective bearings using existing housings, shaft brackets, supports, etc. That has the advantage that lowcostsolutions require no special construction. At the same time, the need for duplicate inventory for accessories is eliminated.The connection dimensions and tolerances correspond to the standards introduced. The temperature range is limited to a maximumof 80 C. The interior structure and fabrication of this bearing series have been optimised for cost-effectiveness, with no compromisein the quality of the materials used. The chromium steel balls used correspond to quality class III, the massive outer shell is made ofmaterial 100Cr6, material number 1.3505, and the cage of PA 66.For cost reasons, the design of unsealed and single-sided sealed bearings was omitted. All bearings in the LME series are alwaysequipped with integrated axial seals on both sides. The sealing rings simultaneously serve to fasten the cage.Shaft Designation MØ Closed Ball circuit Weight Adjustable Ball circuit Weight d r Dmm kg kg mm Tol.m mm Tol.m5 LME 05 UU 4 0,011 LME 05 UU AJ 4 0,01 5 +8/0 12 0/-88 LME 08 UU 4 0,02 LME 08 UU AJ 4 0,02 8 +8/0 16 0/-812 LME 12 UU 4 0,041 LME 12 UU AJ 4 0,04 12 +8/0 22 0/-916 LME 16 UU 5 0,057 LME 16 UU AJ 5 0,056 16 +9/-1 26 0/-920 LME 20 UU 5 0,091 LME 20 UU AJ 5 0,09 20 +9/-1 32 0/-1125 LME 25 UU 6 0,215 LME 25 UU AJ 6 0,212 25 +11/-1 40 0/-1130 LME 30 UU 6 0,325 LME 30 UU AJ 6 0,32 30 +11/-1 47 0/-1140 LME 40 UU 6 0,705 LME 40 UU AJ 6 0,694 40 +13/-2 62 0/-1350 LME 50 UU 6 1,13 LME 50 UU AJ 6 1,11 50 +13/-2 75 0/-1360 LME 60 UU 6 2,22 LME 60 UU AJ 6 2 60 +13/-2 90 0/-1516 MINITEC LINEAR SYSTEM