linear system - Profilex sa

More documents

Recommendations

Info

LINEAR SYSTEM LRSHAFT 16 Part. N° 17.1743/0TECHN. DATA / ITEMS SUPPLIED- Cf 53, hardened 60 ± 5 HRC, precisionground h6- Weight 1,578kg/m- max. Lenght 6 mAPPLICATIONS- MiniTec linear guide LR 16ASSEMBLY- Carefully hammer into the shaft carrierprofile with a plastic-tipped hammer- On guides with L > 6000 mm assembleprofile, shaft support and shaft with offsetjointsSHAFT SUPPORTING PROFILE LR 16 Part. N° 28.0019/0TECHN. DATA / ITEMS SUPPLIED- Aluminium natur, eloxiert E6 / EV1- Weight 0,845kg/m- Lenght 6 mAPPLICATIONS- MiniTec linear guide LR16ASSEMBLY- Make holes with diameter 8.5 in the shaftcarrier profile- Recommended distance: 50 mm from theedge, then approximately every200 - 300 mm- Fasten to the carrier profile using M8 x 30cheese-head screw and M8 slide nut- Hammer the shaft into the shaft carrierprofile with a plastic-tipped hammerMINITEC LINEAR SYSTEM 127
LINEAR SYSTEM LR COMPONENTS LRSHAFT FASTENER LEFT LR 16 Part. N° 28.0809/0TECHNICAL DATA / INCLUDED ITEMS- Aluminium GD, powder coated, grey- With fastening materials- Weight 0,04 kgAPPLICATIONS- Axial fastening of shafts in linear guidessubject to heavy dynamic stressASSEMBLY- Shaft carrier profile and shafts must be 15mm shorter on each side than the carrierprofile- Attach the shaft fastening at both ends ofthe shaft with supplied fastening materials- No machining is necessarySHAFT RETENTION DEVICE RIGHT LR 16 Part. N° 28.0808/0TECHN. DATA / ITEMS SUPPLIED- Aluminium GD, powder coated, grey- Fixing kit- Weight 0,04 kgAPPLICATIONS- Axial fastening of shafts in linear guidessubject to heavy dynamic stressASSEMBLY- Shaft carrier profile and shafts must be 15mm shorter on each side than the carrierprofile- Attach the shaft fastening at both ends ofthe shaft with supplied fastening materials- No machining is necessary128 MINITEC LINEAR SYSTEM
Page 1 and 2:
Import Belgium & LuxembourgProfilex
Page 3 and 4:
INTRODUCTION CONTENTSCONTENTSSTATEM
Page 5 and 6:
INTRODUCTION CONTENTSCONTENTS146 Be
Page 7 and 8:
INTRODUCTION STATEMENTMiniTec CAD S
Page 9 and 10:
LINEAR BEARINGSTECHNICAL DATASPECIA
Page 11 and 12:
LINEAR BEARINGS STANDARD LINEAR BEA
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
LINEAR BEARINGS SUPER LINEAR BEARIN
Page 21 and 22:
LINEAR BEARINGS MINIATURE LINEAR BE
Page 23 and 24:
LINEAR BEARINGS LARGE LINEAR BEARIN
Page 25 and 26:
LINEAR BEARINGS TANDEM LINEAR BEARI
Page 27 and 28:
LINEAR BEARINGS FLANGE LINEAR BEARI
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
LINEAR BEARINGS FLANGE LINEAR BEARI
Page 35 and 36:
Page 37 and 38:
LINEAR BEARINGS COMPACT LINEAR BEAR
Page 39 and 40:
TORQUE LINEAR BEARINGTORQUE LINEARB
Page 41 and 42:
TORQUE LINEAR BEARINGTECHNICAL DATA
Page 43 and 44:
TORQUE LINEAR BEARING TORQUE LINEAR
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
SLIDE UNITS SLIDE UNITSSLIDE UNITSG
Page 57 and 58:
SLIDE UNITS SLIDE UNITS LIGHT SERIE
Page 59 and 60:
SLIDE UNITS SLIDE UNITS LIGHT SERIE
Page 61 and 62:
SLIDE UNITS COMPACT SLIDE UNITSCOMP
Page 63 and 64:
SLIDE UNITS SLIDE UNIT ADJUSTABLESL
Page 65 and 66:
SLIDE UNITS FLANGED SLIDE UNITFLANG
Page 67 and 68:
SLIDE UNITS TANDEM SLIDE UNITTANDEM
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
ASSEMBLED UNITSASSEMBLED UNITS72 MI
Page 75 and 76:
ASSEMBLED UNITS ASSEMBLED UNITSASSE
Page 77 and 78: ASSEMBLED UNITS TRAVERSE FOR ASSEMB
Page 79 and 80: ASSEMBLED UNITS ASSEMBLED UNIT OPEN
Page 81 and 82: ASSEMBLED UNITS ASSEMBLED UNIT OPEN
Page 83 and 84: SHAFT SUPPORT BLOCKS SHAFT SUPPORT
Page 89 and 90: SHAFT SUPPORT BLOCKS FLANGED SHAFT
Page 91 and 92: SHAFT SUPPORT BLOCKS FLANGED SHAFT
Page 93 and 94: SHAFT SUPPORTS SHAFT SUPPORTSHAFT S
Page 95 and 96: SHAFT SUPPORTS SHAFT SUPPORT LOW VE
Page 97 and 98: SHAFT SUPPORTS SHAFT SUPPORT SINGLE
Page 99 and 100: SHAFT SUPPORTS SHAFT SUPPORT TWO-RO
Page 101 and 102: SHAFT SUPPORTS SHAFT SUPPORTSHAFT S
Page 103 and 104: PRECISION SHAFTSPRECISIONSTEEL SHAF
Page 105 and 106: PRECISION SHAFTS2. ShaftsShaft Weig
Page 107 and 108: PRECISION SHAFTSTECHNICAL DATA3. Ch
Page 109 and 110: PRECISION SHAFTSFLEXURAL STRENGTHS5
Page 111 and 112: PRECISION SHAFTSHARDENING DEPTH(Out
Page 113 and 114: PRECISION SHAFTSCIRCULARITYDefiniti
Page 115 and 116: PRECISION SHAFTSSHAFT MACHININGRadi
Page 117 and 118: LINEAR SYSTEM LRLINEAR SYSTEM LRThe
Page 119 and 120: LINEAR SYSTEM LREXAMPLES OF SLIDESL
Page 121 and 122: LINEAR SYSTEM LRPOSSIBLE COMBINATIO
Page 123 and 124: LINEAR SYSTEM LR COMPONENTS LRSHAFT
Page 125 and 126: LINEAR SYSTEM LR COMPONENTS LRSHAFT
Page 127: LINEAR SYSTEM LR COMPONENTS LREND C
Page 131 and 132: LINEAR SYSTEM LR COMPONENTS LRBOLT
Page 133 and 134: LINEAR SYSTEM LR COMPONENTS LRTIMIN
Page 135 and 136: LINEAR SYSTEM LR COMPONENTS LRFASTE
Page 137 and 138: LINEAR SYSTEM LR COMPONENTS LRPROTE
Page 139 and 140: LINEAR SYSTEM LR COMPONENTS LRADAPT
Page 141 and 142: LINEAR SYSTEM LR COMPONENTS LRSLIDE
Page 143 and 144: LINEAR SYSTEM LR PRECISION SHAFTSCO
Page 145 and 146: LINEAR SYSTEM LR PRECISION SHAFTSTI
Page 147 and 148: LINEAR SYSTEM LR PRECISION SHAFTSBE
Page 149 and 150: LINEAR SYSTEM LR PRECISION SHAFTSSL
Page 155 and 156: LINEAR SYSTEM LR PRECISION SHAFTSRA
Page 163 and 164: LINEAR SYSTEM LBLINEAR SYSTEM LB162
Page 165 and 166: LINEAR SYSTEM LB COMPONENTS LBCOMPO
Page 167 and 168: LINEAR SYSTEM LB COMPONENTS LBPROFI
Page 169 and 170: LINEAR SYSTEM LB COMPONENTS LBCENTE
Page 171 and 172: LINEAR SYSTEM LB COMPONENTS LBEND C
Page 173 and 174: LINEAR SYSTEM LB READY FOR USE MODU
Page 179 and 180:
LINEAR SYSTEM LB READY FOR USE MODU
Page 181 and 182:
LINEAR SYSTEM LG/LNSLIDEWAYSThe LN/
Page 183 and 184:
LINEAR SYSTEM LG/LN COMPONENTS LGSL
Page 185 and 186:
LINEAR SYSTEM LG/LN READY FOR USE M
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
SUPPLEMENT INDEXINDEXAADAPTOR PLATE
Page 203 and 204:
SUPPLEMENT INDEX ACCORDING TO PART
Page 205:
NOTESNOTES...204 MINITEC LINEAR SYS
show all

linear system - Profilex sa

Create successful ePaper yourself

Delete template?

Save as template?