Patient Care - Reference Manual - Physician - Fraser Health Authority

3. Printing MARs for the Entire Patient Care UnitFrom the Print Medication Administration Records screen do the following:1) Type the appropriate location mnemonic in the Location field. Note: if the defaultprinter destination here is incorrect, the proper printer destination needs to beentered in step 4 below.2) Leave the Patient field BLANK.3) Enter the correct date in the Start Date field. (This is the date that the MAR will beused, not necessarily today’s date. For example, if it is 22:00 and you are printing anMAR to be used starting at midnight, then you will have to enter tomorrow’s date.)4) Leave the Alternate MAR Format field BLANK. Only enter in the Alternate Printerfield if the defaulted printer destination in step 1 above is incorrect.5) Press the okay key or the along the toolbar to print. Please note that thereis a slight delay before the MAR will start printing.NOTE: If you have done all of the steps correctly, and the MARs still do not print,then do not try again. Call Information Management Service Desk. There is probablysomething wrong with the Meditech server.Health InformaticsHealth Information Systems and Services© Fraser Health Authority, 2006. All rights reserved.40