Patient Care - Reference Manual - Physician - Fraser Health Authority

Once the patient name is identified, the function buttons become active.3) Enter a Service Datea) After selecting a Service Date to review and pressing the key, theorders for that date will appear.b) The system can loop backwards to the next previous service date.i) To perform this function, press the key or click , and choose YESwhen the EXIT YES/NO option appears. The next previous service date willdefault into the Service Date field.ii) To review the orders for that date, press the key.iii) Pressing the key or clicking , again, exits the looping function andreturns to the MAIN MENU4) Marking Orders - You can CANCEL, PRINT (reprint) or AMEND one order or anumber of orders at one time.a) To work on a single order – ‘mark’ the item by:i) Double click the order or highlight it by using the keys and press the key.b) To select more than one order, when the orders are listed together.i) Press (and hold down) the key while moving the selection bar.c) To select more than one order when the orders are not listed directly together.i) Move the mouse to the second item, and press the key while clickingthe left mouse button.d) To select all items between one order and another order not listed directlytogether.i) Move the mouse cursor to the second item, and press the key whileclicking the left mouse button.NOTE: ONLY THOSE ORDERS THAT HAVE BEEN HIGHLIGHTED ORMARKED WILL BE ACTED UPON.5) Cancelling, Printing, or Amending all marked orders:a) Once the orders have been marked, select the appropriate active functionbutton, as described in the table above, i.e. cancel order(s), amend order(s), etc.Health InformaticsHealth Information Systems and Services© Fraser Health Authority, 2006. All rights reserved.22