Tender Notice Dt - Department of Health , J&K

• Prints at least 150 cards/ hour in full colour and upto 1000 cardsan hour in monochrome• Minimum printing resolution of 300 dpi• Automatic or manual feeder for card loading• Compatible to microprocessor chip personalisationNote: The enrollment stations due to the nature of work involved need to bemobile and work under rural & rugged terrain. This should be of primeconsideration while selecting the hardware matching the specifications givenabove.7. Smart Cards7.1. Specifications for Smart CardsCard Operating System shall comply to SCOSTA standards ver. 1.2b with latestaddendum and errata.(refer web site http://scosta.gov.in). The Smart Cards to be usedmust have the valid SCOSTA Compliance Certificate from National InformaticsCenter, New Delhi (refer http://scosta.gov.in). exact smart card specifications are listedas below.7.1.1. SCOSTA Card• Microprocessor based Integrated Circuit(s) card with Contacts, withminimum 32 Kbytes available EEPROM for application data orenhanced available EEPROM as per guidelines issued by MoLE.• Compliant with ISO/IEC 7816-1,2,3• Compliant to SCOSTA 1.2b Dt. 15 March 2002 with latest addendumand errata• Supply Voltage 3V nominal.• Communication Protocol T=0 or T=1.• Data Retention minimum 10 years.• Write cycles minimum 100,000 numbers.• Operating Temperature Range –25 to +55 Degree Celsius.• Plastic Construction PVC or Composite with ABS with PVC overlay.• Surface – Glossy.7.2. Card layoutThe detailed visual & machine readable card layout including the backgroundimage to be used is available on the website www.rsby.in. It is mandatory tofollow these guidelines for physical personalization of the RSBY beneficiarycard.For the chip personalization, detailed specification has been provided in theEnrollment specifications. Along with these NIC has issued specific DLL for93