Mitsubishi Graphic Operation Terminal GOT1000 ... - Omni Ray AG

Unique functions designed for Mitsubishi devicesFor maintenancepersonnelMonitor and change Mitsubishi FA devicesGRAPHIC OPERATION TERMINALSystem monitor functionGOT1000At-a-glance monitoring of network statusGT16GT15GRAPHIC OPERATION TERMINAL GOT1000Network monitor functionEasy adjustment of Q series motion controllerGT16GT15GRAPHIC OPERATION TERMINAL GOT1000Q series motion monitor functionEasy startup and adjustment of a servo amplifierGT16GT15GRAPHIC OPERATION TERMINAL GOT1000Servo amplifier monitor functionINDEX The devices of PLCs, motion controllers, CNCs and robotcontrollers can be monitored and changed. : Only monitoring, but not changing device values and other operations, is availablewith the QSCPU. The current values and setting values of timers (T) andcounters (C) can be changed. The buffer memory (BM) of an intelligent function modulecan be monitored and changed.Easy-to-understand display of buffer memoryvalues and I/O informationGT16GT15GRAPHIC OPERATION TERMINALGOT1000Intelligent module monitor function Buffer memory values of intelligent function modules (e.g.QD75MH) and the ON/OFF status of I/O units can bemonitored and changed. When a QCPU (Q mode), a QSCPU or a LCPU is in use,CPU operating status and existing errors can be monitoredby PLC diagnosis. QD65PD2 and LD77MH16 are now supported. : Supported by XGA/SVGA/VGA models. Enable monitoring of network line conditions of the CC-LinkIE Controller Network, CC-Link IE Field Network,MELSECNET/H, MELSECNET/10, and MELSECNET2 ona dedicated screen. Communication line and information from the host and otherstations can be monitored to check the communicationstatus.Easy maintenance of MELSEC-L SeriesGT16GRAPHIC OPERATION TERMINALMELSEC-L troubleshooting functionGOT1000 The maintenance screen dedicated to LCPU is installed.Without designing new screens and even without using apersonal computer, you can check CPU status/errorinformation easily. Just touch the dedicated screen. You can jump to a functionscreen such as the intelligent unit monitor to quickly takecorrective actions on site. Up to 3 Q-type motion controllers can be used on a singlebase, with monitoring and parameter settings possible.Access to other stations is also possible.• Q172D/Q173DCPU (-S1) • Q170MCPU• Q172H/Q173HCPU • Q172(N)/Q173(N)CPU : Supported only if the Q series motion controller CPU has the SV13/SV22 OSversion.Moreover, available functions of the Q series motion monitor vary according to theCPU type or the servo amplifier model.Save space and cost when no dedicated displaydevice is requiredGT16GT15GRAPHIC OPERATION TERMINALGOT1000CNC monitor function/CNC data I/O functionCNC monitor function Connecting to a CNC (C70, C6/C64) enables functions suchas position display and alarm diagnosis, and allows tooloffset parameters to be set.CNC data I/O function This function can be used to copy and delete CNC C70 workprograms, parameters, etc. In a system which outputs pulse strings, the GOT can beconnected to a servo amplifier in a serial connection toperform the following operations: set up, monitoring, alarmdisplay, diagnosis, parameter setting, and test operations. : Available monitoring functions vary according to the servo amplifier type.Convenient method for minor program changesonsiteGRAPHIC OPERATION TERMINALList editor for A/List editor for FXGOT1000 MELSEC-A series, FX series PLC sequence programs canbe edited in list format (instruction word). Permits minor program changes onsite, even without aperipheral device. Used together with the ladder monitor function, the GT16and GT15 can edit sequence programs while viewing theladder data.For Designers For Initial Startup & For MaintenanceMELSEC Process Specifications,Operations PersonnelGT10 iQ PlatformControl External DimensionsList editor for FXList of ConnectableModels, etc.List editor for A : Supported by XGA/SVGA models.An optional device may be necessary.For details, see "Selection of optional units and devices" (page 81).46 47