SNMP-GSH2402 - kamery airlive airlivecam
SNMP-GSH2402 - kamery airlive airlivecam SNMP-GSH2402 - kamery airlive airlivecam
Function name:IP ToS ClassificationFunction description:Another QoS function is the application of Layer 3 on network framework. Wefocus on TOS field of IP header. There are three bits in TOS field. We meansbit 5~7 of TOS field that we will use. According to these 3 bits, we couldarrange 8 traffics –0 0 0, 0 0 1, 0 1 0, 0 1 1, 1 0 0, 1 0 1, 1 1 0, 1 1 1. As longas we change bit 5~7 of TOS field of IP header, we will create the 8 trafficpackets we meant before. Moreover, we can set High priority or Low priorityfor each traffic class. For instance, if we let TOS 0 0 0 be high priority and TOS0 0 1 be Low Priority, we sent in the packets that have bit 5~7 of TOS Fieldappears 0 0 0 from the port 2 and the packets that have bit 5~7 of TOS Fieldappears 0 0 1 from the port 3. We let the two kinds of packets be transmittedfor port 1 until the port results in congestion. The result is that the packets willbe dropped partially from the port 3 because the packets that belong to LowPriority.Fig. 3-20Parameter description:Quality of Service (QoS) ToS Configuration:Used for setting up the QoS in Layer 3.Port:User can set up the port (1~24) respectively to let TOS QoS functionwork on them. If you would like to set up all ports at a time, user is alsoallowed to choose “All” in the selection list to simplify the procedure ofconfiguration.68
Bit 0, Bit 1, Bit 2:According to the arrangement of Bit 5 ~ Bit 7 in TOS Field of IP Header,it can form 8 kinds of traffics, including 0 0 0, 0 0 1, 0 1 0, 0 1 1, 1 0 0,1 0 1, 1 1 0 and 1 1 1.Class:8 kinds of traffic as mentioned above, user can set up High Priority orLow Priority for each port respectively.69
- Page 22 and 23: • Set IP Address, Subnet Mask and
- Page 24 and 25: Fig. 2-10 the Login Screen for Web2
- Page 26 and 27: Class D and E:Class D is a class wi
- Page 28 and 29: For different network applications,
- Page 30 and 31: Fig. 2-14 Peer-to-peer Network Conn
- Page 32 and 33: In the switch, it supports a simple
- Page 34 and 35: • The Information of Page Layout
- Page 36 and 37: 3-1-1. System InformationFunction n
- Page 38 and 39: 3-1-2. IP ConfigurationIP configura
- Page 40 and 41: IP address:Users can configure the
- Page 42 and 43: 3-1-3. Time ConfigurationThe switch
- Page 44 and 45: Day Light Saving End :This is used
- Page 46 and 47: 3-1-5. Management PolicyThrough the
- Page 48 and 49: IP Range:The switch supports two ki
- Page 50 and 51: Parameter description:Fig. 3-8State
- Page 52 and 53: 3-2. Port ConfigurationFour functio
- Page 54 and 55: Speed / Duplex Mode:Display the spe
- Page 56 and 57: Vendor SN (Serial Number):Show the
- Page 58 and 59: Mode:Set the speed and duplex of th
- Page 61 and 62: Rx Packet:The counting number of th
- Page 63 and 64: Rx Low Priority Packets:Number of R
- Page 65 and 66: 3-3. MirrorFunction name:Mirror Con
- Page 67 and 68: Broadcast & Multicasat for Ingress
- Page 69 and 70: Function name:Per Port PriorityFunc
- Page 71: Bit 0, Bit 1, Bit 2:According to th
- Page 75 and 76: Prioritize Streaming Audio/Video:Be
- Page 77 and 78: Function name:IP Diffserv Classific
- Page 79 and 80: Default SNMP function : EnableDefau
- Page 81 and 82: Parameter description:IGMP snooping
- Page 83 and 84: Add:A new entry of allowed group co
- Page 85 and 86: 3-9. DHCP BootThe DHCP Boot functio
- Page 87 and 88: Metro Mode:The Metro Mode is a quic
- Page 89 and 90: 3-10-2. Tag-based GroupFunction nam
- Page 91 and 92: 3-10-3. Port-based GroupFunction na
- Page 93 and 94: modify a group‘s description and
- Page 95 and 96: Role:This is an egress rule of the
- Page 97 and 98: Port:The port that exists in the se
- Page 99 and 100: Function Name:Static ForwardFunctio
- Page 101 and 102: Function name:MAC AliasFunction des
- Page 103 and 104: 3-12. GVRP ConfigurationGVRP is an
- Page 105 and 106: Normal:It is Normal Registration. T
- Page 107 and 108: LeaveEmpty Message Packets:Number o
- Page 109 and 110: 3-13. STP ConfigurationThe Spanning
- Page 111 and 112: 3-13-2. STP ConfigurationThe STP, S
- Page 113 and 114: 3-13-3. STP Port ConfigurationFunct
- Page 115 and 116: M Check:Migration Check. It forces
- Page 117 and 118: Per Trunking Group supports a maxim
- Page 119 and 120: Aggtr:Status:Aggtr is an abbreviati
- Page 121 and 122: Function name:LACP Detail (LACP Agg
Bit 0, Bit 1, Bit 2:According to the arrangement of Bit 5 ~ Bit 7 in TOS Field of IP Header,it can form 8 kinds of traffics, including 0 0 0, 0 0 1, 0 1 0, 0 1 1, 1 0 0,1 0 1, 1 1 0 and 1 1 1.Class:8 kinds of traffic as mentioned above, user can set up High Priority orLow Priority for each port respectively.69