SNMP-GSH2402 - kamery airlive airlivecam

3-2-4. Detail CounterThe function of Detail Counter collects any information and provides thecounting about the traffic of the port, no matter the packet is good or bad.In the Fig. 3-14, the window can show only one port counter information atthe same time. To see another port’s counter, you have to pull down the list ofSelect, then you will see the figures displayed about the port you had chosen.Each data field has 20-digit long. If the counting is overflow, the counter willbe reset and restart counting. The data is updated every time interval defined by theuser. The valid range is 3 to 10 seconds. The Refresh Interval is used to set theupdate frequency. Default update time is 3 seconds.Function name:Detail CounterFunction description:Fig. 3-14Display the detailed counting number of each port’s traffic. In the Fig. 3-14, thewindow can show all counter information of each port at one time.Parameter description:Rx Packets:The counting number of the packet received.RX Octets:Total received bytes.Rx High Priority Packets:Number of Rx packets classified as high priority.58