SNMP-GSH2402 - kamery airlive airlivecam
SNMP-GSH2402 - kamery airlive airlivecam SNMP-GSH2402 - kamery airlive airlivecam
Speed / Duplex Mode:Display the speed and duplex of all port. There are three speeds 10Mbps,100Mbps and 1000Mbps supported for TP media, and the duplexsupported is half duplex and full duplex. If the media is 1Gbps fiber, it is1000Mbps supported only. The status of speed/duplex mode isdetermined by 1) the negotiation of both local port and link partner in“Auto Speed” mode or 2) user setting in “Force” mode. The local port hasto be preset its capability.Default: None, depends on the result of the negotiation.Flow Control:Show each port’s flow control status.There are two types of flow control in Ethernet, Backpressure for halfduplexoperation and Pause flow control (IEEE802.3x) for full-duplexoperation. The switch supports both of them.Default: Disabled50
Fig. 3-11Parameter description of Port 23 and Port24:Connector Type:Display the connector type, for instance, UTP, SC, ST, LC and soon.Fiber Type:Display the fiber mode, for instance, Multi-Mode, Single-Mode.Tx Central Wavelength:Display the fiber optical transmitting central wavelength, forinstance, 850nm, 1310nm, 1550nm and so on.Baud Rate:Display the maximum baud rate of the fiber module supported, forinstance, 10M, 100M, 1G and so on.Vendor OUI:Display the Manufacturer's OUI code which is assigned by IEEE.Vendor Name:Display the company name of the module manufacturer.Vendor P/N:Display the product name of the naming by module manufacturer.Vendor Rev (Revision):Display the module revision.51
- Page 3 and 4: 3-10. VLAN-------------------------
- Page 5 and 6: About this user’s manualIn this u
- Page 7: • Key Features in the DeviceQoS:S
- Page 10 and 11: 1-4. View of 24 Gigabit L2 Managed
- Page 12 and 13: 1-5. View of the Optional ModulesIn
- Page 14 and 15: • TP Port and Cable Installation
- Page 16 and 17: 2-1-3-1. Cabling Requirements for T
- Page 18 and 19: Case1: All switch ports are in the
- Page 20 and 21: 2-1-4. Configuring the Management A
- Page 22 and 23: • Set IP Address, Subnet Mask and
- Page 24 and 25: Fig. 2-10 the Login Screen for Web2
- Page 26 and 27: Class D and E:Class D is a class wi
- Page 28 and 29: For different network applications,
- Page 30 and 31: Fig. 2-14 Peer-to-peer Network Conn
- Page 32 and 33: In the switch, it supports a simple
- Page 34 and 35: • The Information of Page Layout
- Page 36 and 37: 3-1-1. System InformationFunction n
- Page 38 and 39: 3-1-2. IP ConfigurationIP configura
- Page 40 and 41: IP address:Users can configure the
- Page 42 and 43: 3-1-3. Time ConfigurationThe switch
- Page 44 and 45: Day Light Saving End :This is used
- Page 46 and 47: 3-1-5. Management PolicyThrough the
- Page 48 and 49: IP Range:The switch supports two ki
- Page 50 and 51: Parameter description:Fig. 3-8State
- Page 52 and 53: 3-2. Port ConfigurationFour functio
- Page 56 and 57: Vendor SN (Serial Number):Show the
- Page 58 and 59: Mode:Set the speed and duplex of th
- Page 61 and 62: Rx Packet:The counting number of th
- Page 63 and 64: Rx Low Priority Packets:Number of R
- Page 65 and 66: 3-3. MirrorFunction name:Mirror Con
- Page 67 and 68: Broadcast & Multicasat for Ingress
- Page 69 and 70: Function name:Per Port PriorityFunc
- Page 71 and 72: Bit 0, Bit 1, Bit 2:According to th
- Page 73 and 74: Bit 0, Bit 1, Bit 2:According to th
- Page 75 and 76: Prioritize Streaming Audio/Video:Be
- Page 77 and 78: Function name:IP Diffserv Classific
- Page 79 and 80: Default SNMP function : EnableDefau
- Page 81 and 82: Parameter description:IGMP snooping
- Page 83 and 84: Add:A new entry of allowed group co
- Page 85 and 86: 3-9. DHCP BootThe DHCP Boot functio
- Page 87 and 88: Metro Mode:The Metro Mode is a quic
- Page 89 and 90: 3-10-2. Tag-based GroupFunction nam
- Page 91 and 92: 3-10-3. Port-based GroupFunction na
- Page 93 and 94: modify a group‘s description and
- Page 95 and 96: Role:This is an egress rule of the
- Page 97 and 98: Port:The port that exists in the se
- Page 99 and 100: Function Name:Static ForwardFunctio
- Page 101 and 102: Function name:MAC AliasFunction des
- Page 103 and 104: 3-12. GVRP ConfigurationGVRP is an
Speed / Duplex Mode:Display the speed and duplex of all port. There are three speeds 10Mbps,100Mbps and 1000Mbps supported for TP media, and the duplexsupported is half duplex and full duplex. If the media is 1Gbps fiber, it is1000Mbps supported only. The status of speed/duplex mode isdetermined by 1) the negotiation of both local port and link partner in“Auto Speed” mode or 2) user setting in “Force” mode. The local port hasto be preset its capability.Default: None, depends on the result of the negotiation.Flow Control:Show each port’s flow control status.There are two types of flow control in Ethernet, Backpressure for halfduplexoperation and Pause flow control (IEEE802.3x) for full-duplexoperation. The switch supports both of them.Default: Disabled50