SNMP-GSH2402 - kamery airlive airlivecam
SNMP-GSH2402 - kamery airlive airlivecam SNMP-GSH2402 - kamery airlive airlivecam
IP Range:The switch supports two kinds of options for managed valid IP Range,including “Any” and “Custom”. Default is “Any”. In case that” Custom”had been chosen, you can assigned effective IP range. The valid rangeis 0.0.0.0~255.255.255.255.Incoming Port:The switch supports two kinds of options for managed valid Port Range,including “Any” and “Custom”. Default is “Any”. You can select the portsthat you would like them to be worked and restricted in the managementsecurity configuration if ”Custom” had been chosen.Access Type:Action:The switch supports two kinds of options for managed valid Access Type,including “Any” and “Custom”. Default is “Any”. “Http”, “Telnet” and“SNMP” are three ways for the access and managing the switch in casethat” Custom” had been chosen.The switch supports two kinds of options for managed valid Action Type,including “Deny” and “Accept”. Default is “Deny”. When you choose“Deny” action, you will be restricted and refused to manage the switchdue to the “Access Type” you choose. However, while you select“Accept” action, you will have the authority to manage the switch.Edit/Create:Delete:A new entry of Management Security Configuration can be created afterthe parameters as mentioned above had been setup and then press button. Of course, the existed entry also can be modifiedby pressing this button.Remove the existed entry of Management Security Configuration fromthe management security table.44
3-1-6. Virtual StackFunction name:Virtual StackFunction description:Virtual Stack Management(VSM) is the group management function. Throughthe proper configuration of this function, switches in the same LAN will begrouped automatically. And among these switch, one switch will be a mastermachine, and the others in this group will become the slave devices.VSM offers a simple centralized management function. It is not necessary toremember the address of all devices, manager is capable of managing thenetwork with knowing the address of the Master machine. Instead of SNMP orTelnet UI, VSM is only available in Web UI. While one switch become theMaster, two rows of buttons for group device will appear on the top of its WebUI. By pressing these buttons, user will be allowed to connect the Web UI ofthe devices of the group in the same window without the login of these device.The most top-left button is only for Master device(See Fig.3-9). Thebackground color of the button you press will be changed to represent that thedevice is under your management.Note: It will remove the grouping temporarily in case that you login the switchvia the console.The device of the group will be shown as station address ( the last number ofIP Address) + device name on the button (e.g. 196_SNMP-GSH2402),otherwise it will show ” ---- “ if no corresponding device exists.Once the devices join the group successfully, then they are merely able to bemanaged via Master device, and user will fail to manage them viatelnet/console/web individually.Up to 16 devices can be grouped for VSM, however, only one Master isallowed to exist in each group. For Master redundancy, user may configuremore than two devices as Master device, however, the Master device with thesmaller MAC value will be the Master one. All of these 16 devices canbecome Master device and back up with each other .45
- Page 3 and 4: 3-10. VLAN-------------------------
- Page 5 and 6: About this user’s manualIn this u
- Page 7: • Key Features in the DeviceQoS:S
- Page 10 and 11: 1-4. View of 24 Gigabit L2 Managed
- Page 12 and 13: 1-5. View of the Optional ModulesIn
- Page 14 and 15: • TP Port and Cable Installation
- Page 16 and 17: 2-1-3-1. Cabling Requirements for T
- Page 18 and 19: Case1: All switch ports are in the
- Page 20 and 21: 2-1-4. Configuring the Management A
- Page 22 and 23: • Set IP Address, Subnet Mask and
- Page 24 and 25: Fig. 2-10 the Login Screen for Web2
- Page 26 and 27: Class D and E:Class D is a class wi
- Page 28 and 29: For different network applications,
- Page 30 and 31: Fig. 2-14 Peer-to-peer Network Conn
- Page 32 and 33: In the switch, it supports a simple
- Page 34 and 35: • The Information of Page Layout
- Page 36 and 37: 3-1-1. System InformationFunction n
- Page 38 and 39: 3-1-2. IP ConfigurationIP configura
- Page 40 and 41: IP address:Users can configure the
- Page 42 and 43: 3-1-3. Time ConfigurationThe switch
- Page 44 and 45: Day Light Saving End :This is used
- Page 46 and 47: 3-1-5. Management PolicyThrough the
- Page 50 and 51: Parameter description:Fig. 3-8State
- Page 52 and 53: 3-2. Port ConfigurationFour functio
- Page 54 and 55: Speed / Duplex Mode:Display the spe
- Page 56 and 57: Vendor SN (Serial Number):Show the
- Page 58 and 59: Mode:Set the speed and duplex of th
- Page 61 and 62: Rx Packet:The counting number of th
- Page 63 and 64: Rx Low Priority Packets:Number of R
- Page 65 and 66: 3-3. MirrorFunction name:Mirror Con
- Page 67 and 68: Broadcast & Multicasat for Ingress
- Page 69 and 70: Function name:Per Port PriorityFunc
- Page 71 and 72: Bit 0, Bit 1, Bit 2:According to th
- Page 73 and 74: Bit 0, Bit 1, Bit 2:According to th
- Page 75 and 76: Prioritize Streaming Audio/Video:Be
- Page 77 and 78: Function name:IP Diffserv Classific
- Page 79 and 80: Default SNMP function : EnableDefau
- Page 81 and 82: Parameter description:IGMP snooping
- Page 83 and 84: Add:A new entry of allowed group co
- Page 85 and 86: 3-9. DHCP BootThe DHCP Boot functio
- Page 87 and 88: Metro Mode:The Metro Mode is a quic
- Page 89 and 90: 3-10-2. Tag-based GroupFunction nam
- Page 91 and 92: 3-10-3. Port-based GroupFunction na
- Page 93 and 94: modify a group‘s description and
- Page 95 and 96: Role:This is an egress rule of the
- Page 97 and 98: Port:The port that exists in the se
IP Range:The switch supports two kinds of options for managed valid IP Range,including “Any” and “Custom”. Default is “Any”. In case that” Custom”had been chosen, you can assigned effective IP range. The valid rangeis 0.0.0.0~255.255.255.255.Incoming Port:The switch supports two kinds of options for managed valid Port Range,including “Any” and “Custom”. Default is “Any”. You can select the portsthat you would like them to be worked and restricted in the managementsecurity configuration if ”Custom” had been chosen.Access Type:Action:The switch supports two kinds of options for managed valid Access Type,including “Any” and “Custom”. Default is “Any”. “Http”, “Telnet” and“<strong>SNMP</strong>” are three ways for the access and managing the switch in casethat” Custom” had been chosen.The switch supports two kinds of options for managed valid Action Type,including “Deny” and “Accept”. Default is “Deny”. When you choose“Deny” action, you will be restricted and refused to manage the switchdue to the “Access Type” you choose. However, while you select“Accept” action, you will have the authority to manage the switch.Edit/Create:Delete:A new entry of Management Security Configuration can be created afterthe parameters as mentioned above had been setup and then press button. Of course, the existed entry also can be modifiedby pressing this button.Remove the existed entry of Management Security Configuration fromthe management security table.44
Change language