SNMP-GSH2402 - kamery airlive airlivecam

• The Information of Page Layout⎯On the top side, it shows the front panel of the switch. In the front panel, thelinked ports will display green; as to the ports, which are link off, they will bedark. For the optional modules, the slot will show only a cover plate if nomodule exists and will show a module if a module is present. The image ofmodule depends on the one you inserted. The same, if disconnected, the portwill show just dark, if linked, green.In this device, there are clicking functions on the panel provided for theinformation of the ports. These are very convenient functions for browsing theinformation of a single port. When clicking the port on the front panel, aninformation window for the port will be pop out. (See Fig. 3-3)Fig. 3-3 port detail informationIn Fig. 3-3, it shows the basic information of the clicked port. With this, you’llsee the information about the port status, traffic status and bandwidth rating foregress and ingress respectively.⎯⎯On the left-top corner, there is a pull-down list for Auto Logout. For the sake ofsecurity, we provide auto-logout function to protect you from illegal user as youare leaving. If you do not choose any selection in Auto Logout list, it meansyou turn on the Auto Logout function and the system will be logged outautomatically when no action on the device 3 minutes later. If OFF is chosen,the screen will keep as it is. Default is ON.On the left side, the main menu tree for web is listed in the page. They arehierarchical menu. Open the function folder, a sub-menu will be shown. Thefunctions of each folder are described in its corresponded section respectively.When clicking it, the function is performed. The following list is the full function30