12.07.2015 Views

SNMP-GSH2402 - kamery airlive airlivecam

SNMP-GSH2402 - kamery airlive airlivecam

SNMP-GSH2402 - kamery airlive airlivecam

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3. Operation ofWeb-based ManagementThis chapter instructs you how to configure and manage the switch throughthe web user interface it supports, to access and manage the 22-Port10/100/1000Mbps TP and 2-Port Gigabit TP/SFP Fiber management Ethernetswitch. With this facility, you can easily access and monitor through any one port ofthe switch all the status of the switch, including MIBs status, each port activity,Spanning tree status, port aggregation status, multicast traffic, VLAN and prioritystatus, even illegal access record and so on.The default values of the managed switch are listed in the table below:IP Address 192.168.1.1Subnet Mask 255.255.255.0Default Gateway 192.168.1.254UsernamePasswordTable 3-1adminadminAfter the managed switch has been finished configuration in the CLI via theswitch’s serial interface, you can browse it. For instance, type http://192.168.1.1 inthe address row in a browser, it will show the following screen (see Fig.3-1) and askyou inputting username and password in order to login and access authentication.The default username and password are both “admin”. For the first time to use,please enter the default username and password, then click the button.The login process now is completed.Just click the link of “Forget Password” in WebUI (See Fig. 3-1) or input“Ctrl+Z” in CLI’s login screen (See Fig. 4-1~4-2) in case the user forgets themanager’s password. Then, the system will display a serial No. for the user. Writedown this serial No. and contact your vendor, the vendor will give you a temporarypassword. Use this new password as ID and Password, and it will allow the user tologin the system with manager authority temporarily. Due to the limit of this newpassword, the user only can login the system one time, therefore, please modifyyour password immediately after you login in the system successfully.In this login menu, you have to input the complete username and passwordrespectively, the switch will not give you a shortcut to username automatically. Thislooks inconvenient, but safer.27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!