SNMP-GSH2402 - kamery airlive airlivecam

• Set IP Address, Subnet Mask and Default Gateway IP AddressPlease refer to Fig. 2-7 CLI Management for details about the ex-factorysetting. They are default setting of IP address. You can first either configure your PCIP address or change IP address of the switch, next to change the IP address ofdefault gateway and subnet mask.For example, your network address is 10.1.1.0, and subnet mask is255.255.255.0. You can change the switch’s default IP address 192.168.1.1 to10.1.1.1 and set the subnet mask to be 255.255.255.0. Then, choose your defaultgateway, may be it is 10.1.1.254.Default Value 24 Gigabit L2 Managed Switch Your Network SettingIP Address 192.168.1.1 10.1.1.1Subnet 255.255.255.0 255.255.255.0Default Gateway 192.168.1.254 10.1.1.254Table 2-3After completing these settings in the switch, it will reboot to have theconfiguration taken effect. After this step, you can operate the management throughthe network, no matter it is from a web browser or Network Management System(NMS).Fig. 2-8 the Login Screen for CLI18