SNMP-GSH2402 - kamery airlive airlivecam

More documents

Recommendations

Info

• rebootrebootSyntax:rebootDescription:To reboot the system.Argument:None.Possible value:None.Example:SNMP-GSH2402# reboot• snmpdisableSyntax:disable set-abilitydisable snmpDescription:The Disable here is used for the de-activation of snmp or set-community.Argument:None.Possible value:None.Example:SNMP-GSH2402(snmp)# disable snmpSNMP-GSH2402(snmp)# disable set-abilityenableSyntax:enable set-abilityenable snmpDescription:The Enable here is used for the activation snmp or set-community.Argument:None.Possible value:None.Example:SNMP-GSH2402(snmp)# enable snmpSNMP-GSH2402(snmp)# enable set-ability214
setSyntax:set get-community set set-community set trap [port] [community]Description:The Set here is used for the setup of get-community, set-community, trap host ip,host port and trap-community.Argument:: trap number: ip address or domain name: trap port:trap community namePossible value:: 1 to 6:1~65535Example:SNMP-GSH2402(snmp)# set get-community publicSNMP-GSH2402(snmp)# set set-community privateSNMP-GSH2402(snmp)# set trap 1 192.168.1.1 162 publicshowSyntax:showDescription:The Show here is to display the configuration of SNMP.Argument:None.Possible value:None.Example:SNMP-GSH2402(snmp)# showSNMP : EnableGet Community: publicSet Community: private [Enable]Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: publicTrap Host 2 IP Address: 0.0.0.0 Port: 162 Community: publicTrap Host 3 IP Address: 0.0.0.0 Port: 162 Community: publicTrap Host 4 IP Address: 0.0.0.0 Port: 162 Community: publicTrap Host 5 IP Address: 0.0.0.0 Port: 162 Community: publicTrap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public215
Page 3 and 4:
3-10. VLAN-------------------------
Page 5 and 6:
About this user’s manualIn this u
Page 7:
• Key Features in the DeviceQoS:S
Page 10 and 11:
1-4. View of 24 Gigabit L2 Managed
Page 12 and 13:
1-5. View of the Optional ModulesIn
Page 14 and 15:
• TP Port and Cable Installation
Page 16 and 17:
2-1-3-1. Cabling Requirements for T
Page 18 and 19:
Case1: All switch ports are in the
Page 20 and 21:
2-1-4. Configuring the Management A
Page 22 and 23:
• Set IP Address, Subnet Mask and
Page 24 and 25:
Fig. 2-10 the Login Screen for Web2
Page 26 and 27:
Class D and E:Class D is a class wi
Page 28 and 29:
For different network applications,
Page 30 and 31:
Fig. 2-14 Peer-to-peer Network Conn
Page 32 and 33:
In the switch, it supports a simple
Page 34 and 35:
• The Information of Page Layout
Page 36 and 37:
3-1-1. System InformationFunction n
Page 38 and 39:
3-1-2. IP ConfigurationIP configura
Page 40 and 41:
IP address:Users can configure the
Page 42 and 43:
3-1-3. Time ConfigurationThe switch
Page 44 and 45:
Day Light Saving End :This is used
Page 46 and 47:
3-1-5. Management PolicyThrough the
Page 48 and 49:
IP Range:The switch supports two ki
Page 50 and 51:
Parameter description:Fig. 3-8State
Page 52 and 53:
3-2. Port ConfigurationFour functio
Page 54 and 55:
Speed / Duplex Mode:Display the spe
Page 56 and 57:
Vendor SN (Serial Number):Show the
Page 58 and 59:
Mode:Set the speed and duplex of th
Page 61 and 62:
Rx Packet:The counting number of th
Page 63 and 64:
Rx Low Priority Packets:Number of R
Page 65 and 66:
3-3. MirrorFunction name:Mirror Con
Page 67 and 68:
Broadcast & Multicasat for Ingress
Page 69 and 70:
Function name:Per Port PriorityFunc
Page 71 and 72:
Bit 0, Bit 1, Bit 2:According to th
Page 73 and 74:
Bit 0, Bit 1, Bit 2:According to th
Page 75 and 76:
Prioritize Streaming Audio/Video:Be
Page 77 and 78:
Function name:IP Diffserv Classific
Page 79 and 80:
Default SNMP function : EnableDefau
Page 81 and 82:
Parameter description:IGMP snooping
Page 83 and 84:
Add:A new entry of allowed group co
Page 85 and 86:
3-9. DHCP BootThe DHCP Boot functio
Page 87 and 88:
Metro Mode:The Metro Mode is a quic
Page 89 and 90:
3-10-2. Tag-based GroupFunction nam
Page 91 and 92:
3-10-3. Port-based GroupFunction na
Page 93 and 94:
modify a group‘s description and
Page 95 and 96:
Role:This is an egress rule of the
Page 97 and 98:
Port:The port that exists in the se
Page 99 and 100:
Function Name:Static ForwardFunctio
Page 101 and 102:
Function name:MAC AliasFunction des
Page 103 and 104:
3-12. GVRP ConfigurationGVRP is an
Page 105 and 106:
Normal:It is Normal Registration. T
Page 107 and 108:
LeaveEmpty Message Packets:Number o
Page 109 and 110:
3-13. STP ConfigurationThe Spanning
Page 111 and 112:
3-13-2. STP ConfigurationThe STP, S
Page 113 and 114:
3-13-3. STP Port ConfigurationFunct
Page 115 and 116:
M Check:Migration Check. It forces
Page 117 and 118:
Per Trunking Group supports a maxim
Page 119 and 120:
Aggtr:Status:Aggtr is an abbreviati
Page 121 and 122:
Function name:LACP Detail (LACP Agg
Page 123 and 124:
3-15. 802.1X Configuration802.1X po
Page 125 and 126:
Authentication serverFig. 3-54CBAut
Page 127 and 128:
Only MultiHost 802.1X is the type o
Page 129 and 130:
Function name:802.1X Mode SettingFu
Page 131 and 132:
Function name:Param. SettingFunctio
Page 133 and 134:
3-16. Alarm ConfigurationAlarm Conf
Page 135 and 136:
Parameter description:Email:Mail Se
Page 137 and 138:
3-17-1. Save/RestoreFunction name:S
Page 139 and 140:
Function name:Restore User Configur
Page 141 and 142:
3-18. DiagnosticsThree functions, i
Page 143 and 144:
Function name:Ping TestFunction des
Page 145 and 146:
3-20. LogThis function shows the lo
Page 147 and 148:
3-21. Firmware UpgradeSoftware upgr
Page 149 and 150:
3-23. LogoutYou can manually logout
Page 151 and 152:
4. Operation of CLIManagement4-1. C
Page 153 and 154:
4-2. Commands of CLITo see the comm
Page 155 and 156:
helpSyntax:helpDescription:To show
Page 157 and 158:
logoutSyntax:logoutDescription:When
Page 159 and 160:
save userSyntax:save userDescriptio
Page 161 and 162:
set port-controlSyntax:set port-con
Page 163 and 164:
set state Description:To configur
Page 165 and 166:
port 2) port control : AutoreAuthMa
Page 167 and 168: modifySyntax:modify Description:To
Page 169 and 170: set serverSyntax:set server Descrip
Page 171 and 172: del trapSyntax:del trap Description
Page 173 and 174: Example:SNMP-GSH2402(alarm-events)#
Page 175 and 176: set phone-numberSyntax:set phone-nu
Page 177 and 178: • bandwidthdisable egress-rateSyn
Page 179 and 180: showSyntax:showDescription:To displ
Page 181 and 182: import user-confSyntax:import user-
Page 183 and 184: • dhcp-bootset dhcp-bootSyntax:se
Page 185 and 186: • firmwareset upgrade-pathSyntax:
Page 187 and 188: SNMP-GSH2402(gvrp)# group 2SNMP-GSH
Page 189 and 190: set restrictedSyntax:set restricted
Page 191 and 192: show counterSyntax:show counter Des
Page 193 and 194: set modeSyntax:set mode Description
Page 195 and 196: set ipSyntax:set ip Description:T
Page 197 and 198: showSyntax:showDescription:To show
Page 199 and 200: searchSyntax:search Description:T
Page 201 and 202: addSyntax:add [alias]Description
Page 203 and 204: • managementaddSyntax:Usage:set [
Page 205 and 206: edit [#]: the specific management p
Page 207 and 208: • max-pkt-lenset lenSyntax:set le
Page 209 and 210: showSyntax:showDescription:To displ
Page 211 and 212: enable flow-controlSyntax:enable fl
Page 213 and 214: Port 23 SFP information------------
Page 215 and 216: set diffservSyntax:set diffserv De
Page 217: set tosSyntax:set tos Description
Page 221 and 222: set configSyntax:set config Desc
Page 223 and 224: show portSyntax:show portDescriptio
Page 225 and 226: • systemset contactSyntax:set con
Page 227 and 228: • tftpset serverSyntax:set server
Page 229 and 230: set ntpSyntax:set ntp Description:
Page 231 and 232: show aggtr-viewSyntax:show aggtr-vi
Page 233 and 234: • vlandel port-groupSyntax:del po
Page 235 and 236: set modeSyntax:set mode [up-link]D
Page 237 and 238: set tag-groupSyntax:set tag-group
Page 239 and 240: • vsdisableSyntax:disableDescript
Page 241 and 242: 5. Maintenance5-1. Resolving No Lin
Page 243 and 244: Hardware Specifications• Standard
Page 245 and 246: Management Software SpecificationsA
show all

SNMP-GSH2402 - kamery airlive airlivecam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?