SNMP-GSH2402 - kamery airlive airlivecam

logoutSyntax:logoutDescription:When you enter this command via Telnet connection, you would logout the systemand disconnect. If you connect the system through direct serial port with RS-232cable, you would logout the system and be back to the initial login prompt when yourun this command.Argument:None.Possible value:None.Example:SNMP-GSH2402# logoutrestore defaultSyntax:restore defaultDescription:When you use this function in CLI, the system will show you the information “Do youwant to restore the default IP address?(y/n)”. If you choose Y or y, the IP addresswill restore to default “192.168.1.1”. If you choose N or n, the IP address will keepthe same one that you had saved before.If restoring default successfully, the CLI would prompt if reboot immediately or not. Ifyou press Y or y, the system would reboot immediately; otherwise, it would be backto the CLI system. After restoring default configuration, all the changes in the startupconfiguration would be lost. After rebooting, the entire startup configuration wouldreset to factory default.Argument:None.Possible value:None.Example:SNMP-GSH2402# restore defaultRestoring ...Restore Default Configuration SuccessfullyPress any key to reboot system.153