SNMP-GSH2402 - kamery airlive airlivecam

All bridges in the LAN will re-learn and determine which the root bridge is.Maximum Age time is assigned by root bridge in unit of seconds. Defaultis 20 seconds.Current Forward Delay:Show the current root bridge forward delay time. The value of ForwardDelay time is set by root. The Forward Delay time is defined as the timespent from Listening state moved to Learning state or from Learningstate moved to Forwarding state of a port in bridge.Hello Time:Show the current hello time of the root bridge. Hello time is a timeinterval specified by root bridge, used to request all other bridgesperiodically sending hello message every “hello time” seconds to thebridge attached to its designated port.STP Topology Change Count:STP Topology Change Count expresses the time spent in unit of secondssince the beginning of the Spanning Tree Topology Change to the end ofthe STP convergence. Once the STP change is converged, the TopologyChange count will be reset to 0. The figures showing in the screen maynot be the exact time it spent but very close to, because the time iseclipsing.Time Since Last Topology Change:Time Since Last Topology Change is the accumulated time in unit ofseconds the STP has been since the last STP Topology Change wasmade. When Topology Change is initiated again, this counter will bereset to 0. And it will also count again once STP topology Change iscompleted.Fig. 3-46106