Windows Setup Guide for ST-B10 - Toshiba Tec

More documents

Recommendations

Info

Windows Setup Guide for ST-B10TOSHIBA TEC CORPORATION EAA-030335.4. Calibration for Touch PanelWhen you changed the resolution / indication method of the display via VIA Graphic Driver, it isrecommended that you set the touch panel function using the "Alignment" function.Because the touch panel driver does not adjust itself automatically when the setting of graphicis changed. Otherwise, the wrong click point of the touch panel might happen unless you do thisprocedure.67
Windows Setup Guide for ST-B10TOSHIBA TEC CORPORATION EAA-03033There are two ways to calibrate for touch panel. Please select an easy-to-use way.1. Calibration for touch panel to start from task trayRight-click on the “Elo Touchscreen” from task tray, the following menu appears. Click on the"Align…" menu.2. Calibration for touch panel to start from control panelOpen “Elo Touchscreen” from “Control Panel”, following window appears. Then, select the“General” tab and click on the “Align” button.68
Page 1 and 2:
Windows Setup Guide for ST-B10TOSHI
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20: Windows Setup Guide for ST-B10TOSHI
Page 69: Windows Setup Guide for ST-B10TOSHI
show all

Windows Setup Guide for ST-B10 - Toshiba Tec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?