Download - Buderus

4Before installation4.2 Component description4.2.1 Collector racksThe collectors are attached to horizontal rails that aremounted on roof hooks or standoffs. A variety ofattachment methods are available to match different rooftypes and surfaces.81 2 3345Fig. 27663043965.03-1.SDMounting system for 2 collectors – 1 basic system, 1 extension system and 2 sets of roof hooks (hooks for tile roofs shown)Basic mounting system for each collector arrayincluding the first collector (Fig. 2):Extension mounting system for each additionalcollector (Fig. 2):1 Horizontal rail 2 × 1 Horizontal rail 2 ×3 Single-sided collector clamp 4 × 2 Double-sided collector clamp 2 ×7 Collector hanger 2 × 7 Collector hanger 2 ×8 M8 nut 4 × 6 Rail connector 2 ×8 M8 nut 4 ×Roof hook for tile roofs, per collector (Fig. 2):4 Roof hook for tile roofs, adjustable 4 ×5 Sliding nut 4 ×NOTICEFor higher snow and wind loads,additional horizontal rails and roof hooksmay be needed.8Logasol SKN 3.0 - We reserve the right to make any changes due to technical modifications.