guidance notes for the provision and installation of non-turf ... - Ecb

More documents

Recommendations

Info

03 Pitch Guidance3.1 Design of Non-Turf PitchesNon-turf pitches can be divided into two main groups - Bound andUnbound.(a) Bound is where the surfaces are laid on a structure that is boundtogether with a bonding agent like Bitmac, concrete etc.(b) Unbound is where the surfaces are laid on a structure that is notbound and is held together by the interlocking and particle sizedistribution of the particles.Unbound has the ability to absorb moisture and alter the playingcharacteristic of a pitch more readily than a bound structure,therefore, it plays similar to a good natural turf pitch with changeableplaying characteristics influenced by the moisture content in the baseformation.Soil is an unbound structure and pitches that use a clay base providethe nearest playing performance to a grass pitch, they do howeverrequire the highest maintenance inputs.This information should be only used as a generalisation as designersmay well have their own method of meeting the ECB PerformanceStandard and providing a pitch that plays like grass.There are a number of designs which have been shown to meet thecriteria as laid down within the ECB Standard but may not be anapproved ECB system, therefore, they would not be recommendedby ECB.Research has shown designers may adjust the performance of apitch by adjusting any one of the following:(a) The surface(b) The underlay or underlays(c) The upper supporting layers(d) The upper base formation(e) Lower base formation (if required)(f) The length, stiffness and formation of the synthetic turf pile.(g) The depth, stiffness and composition of the surfacing componentsand underlays.(h) The composition and depth of the supporting layers.(i) Introducing an underlay or additional underlays between thesurface and the supporting layers.(j) Altering the length of the synthetic turf pile, making it erect andincreasing the density. Earlier pitches required a pile length of nogreater than 6 mm as in the earlier days the longer the pile, themore the playing characteristic were affected. This is no longerapplicable with recent surface introductions as long as the piledoes not flatten significantly.Guidance Notes for The Provision and Installation of Non-Turf Cricket Pitches and Net Cage FacilitiesECB 15.04.08 © 2008 ECB
03 Pitch Guidance(k) Altering the depth of the supporting layers, i.e. reducing thedepth of concrete from 100 mm to 70 mm. A similar situation isapplicable to Bitmac.3.2 ClassificationPractical research during the past 25 years has shown the top 100mm of a non-turf pitch influence the playing performance. The abilityof this zone to absorb moisture is a major factor in determining how apitch plays.The number and depth of moisture absorbing components in thezone affect the extent to which a pitch performs, thereby providingthe nearest comparison to a grass pitch. It is the combination ofcomponents and the extent to which they are affected by moisturethat determine “the changeability” in a pitch in the same way as agrass pitch is affected.Based on the ability of the structure to absorb or be affected bymoisture the playing performance of a pitch is classified as eithertotally dynamic, semi dynamic, totally static or semi static.Guidance Notes for The Provision and Installation of Non-Turf Cricket Pitches and Net Cage FacilitiesECB 15.04.08 © 2008 ECB
Page 10 and 11: 03 Pitch Guidance3.3 Types of Syste
Page 12 and 13: 03 Pitch Guidance3.4 Selecting a Pi
Page 14 and 15: 03 Pitch Guidance3.7 Unacceptable F
Page 16 and 17: 04 Net and Cage Guidancenet system
Page 18 and 19: 05 Other Considerations5.1 Warranti

guidance notes for the provision and installation of non-turf ... - Ecb

Create successful ePaper yourself

Delete template?

Save as template?