Program EDDYBL

418 APPENDIX D . PROGRAM EDDYBLsymsiz= .080 ( .08" experimental data symbols)'coma) , 9600 , )none) , 1 , 8The last line indicates the printer is connected to serial port COMl :and the port is set at 9600 baud, no parity, 1 stop bit and 8 data bits .If disk file ploteb.dat is not available, Program PLOTEB uses thefollowing set of default valuesmon = 18, ifore = 15, iback = 1, nprin = 24, mode = 39, ksize = 100,symsiz = .08, devid = `LPT1'Note that nbaud, parity,ports .3 03c f0nsiop and lword are not used for parallel0ONu +OO WIEGHARDT- COMPUTEDO°o .+ 0.6 0.e 1 .0 1 .2 3 .+x(m)OW+Figure D .2 : Sample plot created by Program PLOTEB .