Manitowoc

Step 12 Use half of the sanitizer/water solution tosanitize all foodzone surfaces of the ice machine andbin. Use a cloth or sponge to liberally apply thesolution. When sanitizing, pay particular attention tothe following areas:• Evaporator plastic parts - including top, bottom andsides• Bin bottom, sides and topDo not rinse the sanitized areas.Step 13 Replace all removed components.Step 14 Reapply power and water to the ice machineand place the toggle switch in the WASH position.Step 15 Add the proper amount of Manitowoc IceMachine Sanitizer to the water trough.ModelQM20/QM30Amount of Sanitizer45 mlStep 16 Wait until the sanitize cycle is complete(approximately 45 minutes) then place the toggleswitch in the OFF position, disconnect power andwater supplies to the ice machine.! WarningDisconnect electric power to the ice machineat the electric switch box before proceeding.Step 17 Repeat step 6 to remove parts for handsanitizing.Step 18 Mix a solution of sanitizer and warm water.Solution Type Water Mixed WithSanitizer 23L. (6 gal )120 ml (4 oz)sanitizerStep 19 Use half of the sanitizer/water solution tosanitize all removed components. Use a cloth orsponge to liberally apply the solution to all surfaces ofthe removed parts or soak the removed parts in thesanitizer/water solution. Do not rinse parts aftersanitizing.Part Number 80-01111-9 7/10 65