Manitowoc

Step 1 Set the toggle switch to the OFF position afterice falls from the evaporator at the end of a Harvestcycle. Or, set the switch to the OFF position and allowthe ice to melt off the evaporator.! CautionNever use anything to force ice from th eevaporator. Damage may result.Step 2 Remove all ice from the bin.Step 3 To start a cleaning cycle, move the toggleswitch to the WASH position.Step 4 Wait until water flows over the evaporator(about three minutes) then add the proper amount ofManitowoc Ice Machine Cleaner to the water trough.ModelQM20/QM30Amount of Cleaner45 mlStep 5 Wait until the clean cycle is complete(approximately 45 minutes) then place the toggleswitch in the OFF position, disconnect power andwater supplies to the ice machine.! WarningDisconnect electric power to the ice machineat the electric switch box before proceeding.Part Number 80-01111-9 7/10 61