Manitowoc

Q270 Condenser Fan Motor ReplacementAccess to remove, clean or replace the condenser fan/motor can be obtained by performing the following:1. Disconnect electrical power to the ice machine atthe electrical service disconnect.2. Remove the screws that secure the condenser tothe cabinet and the base to the cabinet.3. Slide the base forward until contact is made withthe stop screw (approximately 2.5" [6.3 cm]).! CautionDo not move base p ast the st op scre w, t ubingdamage could result.4. Remove right hand screw securing condenser tobase.5. Pivot condenser forward to obtain 5" (12.7 cm)between the cabinet and condenser shroud. Takecare not to kink refrigeration tubing.5" (12.7 CM)CLEARANCEAFTERPIVOTINGCONDENSERREMOVE SCREW ANDPIVOT CONDENSER TOOBTAIN 5" (12.7 CM)CLEARANCE BETWEENCABINET ANDCONDENSER SHROUD.REMOVE THREESCREWS ANDPULL BASEFORWARD TOSTOP SCREW.2.5" (6.3 CM) TOSTOP SCREWAccessing the Condenser Fan MotorPT1295A196 Part Number 80-01111-9 7/10