Manitowoc
Manitowoc Manitowoc
REFRIGERANT RE-USE POLICYManitowoc recognizes and supports the need forproper handling, re-use, and disposal of CFC andHCFC refrigerants. Manitowoc service proceduresrequire recapturing refrigerants, not venting them tothe atmosphere.It is not necessary, in or out of warranty, to reduce orcompromise the quality and reliability of yourcustomers’ products to achieve this.ImportantManitowoc Ice assumes no respon sibility foruse of con taminated refrigerant. Da mageresulting from the use of co ntaminated,recovered, or recycled refrigerant is the soleresponsibility of the servicing company.Manitowoc approves the use of:1. New Refrigerant• Must be of original nameplate type.2. Reclaimed Refrigerant• Must be of original nameplate type.• Must meet ARI Standard 700 (latest edition)specifications.3. Recovered or Recycled Refrigerant• Must be recovered or recycled in accordancewith current local, state and federal laws.• Must be recovered from and re-used in thesame Manitowoc product. Re-use of recoveredor recycled refrigerant from other products isnot approved.• Recycling equipment must be certified to ARIStandard 740 (latest edition) and bemaintained to consistently meet this standard.182 Part Number 80-01111-9 7/10
4. Recovered refrigerant must come from a“contaminant-free” system. To decide whether thesystem is contaminant free, consider:• Type(s) of previous failure(s)• Whether the system was cleaned, evacuatedand recharged properly following failure(s)• Whether the system has been contaminatedby this failure• Compressor motor burnouts and improper pastservice prevent refrigerant re-use.• Refer to “System Contamination Cleanup” onpage 190 to test for contamination.5. “Substitute” or “Alternative” Refrigerant• Must use only Manitowoc-approved alternativerefrigerants.• Must follow Manitowoc-published conversionprocedures.Part Number 80-01111-9 7/10 183
- Page 132 and 133: Q130/Q170/Q210/Q270 Ice Machines On
- Page 134 and 135: QM20/QM30DIAGNOSING AN ICE MACHINET
- Page 136 and 137: QM30The QM30 ice machines have a ve
- Page 138 and 139: Ice Production CheckThe QM20/QM30 d
- Page 140 and 141: REFRIGERATION DIAGNOSTICSImportant:
- Page 142 and 143: 5. Install thermometer thermocouple
- Page 144 and 145: SM50DIAGNOSING AN ICE MACHINETHAT W
- Page 146 and 147: ICE QUALITY IS POOR — CUBES ARE S
- Page 148 and 149: ICE MACHINE RUNS AND NO ICE IS PROD
- Page 150 and 151: DISCHARGE PRESSURE HIGH CHECKLISTIm
- Page 152 and 153: ProcedureStep1. Determine the ice m
- Page 154 and 155: Other• Non-Manitowoc components i
- Page 156 and 157: FindingsThe inlet of the harvestval
- Page 158 and 159: ADJUSTING CUBE WEIGHTThe cube weigh
- Page 160 and 161: Bin SwitchQM45/Q130/Q170/Q210/Q270F
- Page 162 and 163: Bin Switch Removal — QM45/Q1301.
- Page 164 and 165: Bin ThermostatQM20/QM30FunctionThe
- Page 166 and 167: SM50FunctionThe bin thermostat stop
- Page 168 and 169: Check Procedure! WarningHigh (line)
- Page 170 and 171: Temperature/Resistance ChartAs the
- Page 172 and 173: ON/OFF/WASH Toggle SwitchFUNCTIONTh
- Page 174 and 175: Ice Thickness ProbeQM45/Q130/Q170/Q
- Page 176 and 177: Compressor Electrical DiagnosticsTh
- Page 178 and 179: Fan Cycle ControlQM45/Q130/Q170/Q21
- Page 180 and 181: Filter-DriersLIQUID LINE FILTER DRI
- Page 184 and 185: RECOVERY AND RECHARGING PROCEDURESQ
- Page 186 and 187: NOTE: Manifold gauges must be remov
- Page 188 and 189: ImportantManifold gau ges must be r
- Page 190 and 191: System Contamination CleanupGENERAL
- Page 192 and 193: MILD SYSTEM CONTAMINATION CLEANUPPR
- Page 194 and 195: REPLACING PRESSURE CONTROLS WITHOUT
- Page 196 and 197: Q270 Condenser Fan Motor Replacemen
- Page 198 and 199: MAX. 1300°F(700°C)SV30714. Apply
- Page 200 and 201: High Pressure Cutout (HPCO) Control
- Page 202 and 203: This Page Intentionally Left Blank2
- Page 204 and 205: QM20 SELF-CONTAINED AIR-COOLEDNOTE:
- Page 206 and 207: QM45 SELF-CONTAINED AIR-COOLEDNOTE:
- Page 208 and 209: SM50 SELF-CONTAINED AIR-COOLEDNOTE:
- Page 210 and 211: Q130 SELF-CONTAINED AIR-COOLED(Afte
- Page 212 and 213: Q170 SELF-CONTAINED AIR-COOLEDNOTE:
- Page 214 and 215: Q210 SELF-CONTAINED WATER-COOLEDNOT
- Page 216 and 217: Q270 SELF-CONTAINED WATER-COOLEDNOT
- Page 218 and 219: QM20CAUTION: DISCONNECT POWER BEFOR
- Page 220 and 221: QM30230V/1 Ph/50 HzL1CAUTION: DISCO
- Page 222 and 223: SM50L1CAUTION: DISCONNECT POWER BEF
- Page 224 and 225: Q130/Q170/Q210Danfoss CompressorL1N
- Page 226 and 227: Q270Danfoss CompressorL1NOTE: DIAGR
- Page 228 and 229: QM45/Q130/Q170/Q210/Q270ICE THICKNE
- Page 230 and 231: Tubing SchematicsQM20/QM30 Tubing S
REFRIGERANT RE-USE POLICY<strong>Manitowoc</strong> recognizes and supports the need forproper handling, re-use, and disposal of CFC andHCFC refrigerants. <strong>Manitowoc</strong> service proceduresrequire recapturing refrigerants, not venting them tothe atmosphere.It is not necessary, in or out of warranty, to reduce orcompromise the quality and reliability of yourcustomers’ products to achieve this.Important<strong>Manitowoc</strong> Ice assumes no respon sibility foruse of con taminated refrigerant. Da mageresulting from the use of co ntaminated,recovered, or recycled refrigerant is the soleresponsibility of the servicing company.<strong>Manitowoc</strong> approves the use of:1. New Refrigerant• Must be of original nameplate type.2. Reclaimed Refrigerant• Must be of original nameplate type.• Must meet ARI Standard 700 (latest edition)specifications.3. Recovered or Recycled Refrigerant• Must be recovered or recycled in accordancewith current local, state and federal laws.• Must be recovered from and re-used in thesame <strong>Manitowoc</strong> product. Re-use of recoveredor recycled refrigerant from other products isnot approved.• Recycling equipment must be certified to ARIStandard 740 (latest edition) and bemaintained to consistently meet this standard.182 Part Number 80-01111-9 7/10
Change language