Manitowoc

ON/OFF/WASH Toggle SwitchFUNCTIONThe switch is used to place the ice machine in ON,OFF or WASH mode of operation.SPECIFICATIONSSingle-pole, double-throw switch. The switch isconnected into a varying low D.C. voltage circuit.CHECK PROCEDURENOTE: Because of a wide variation in D.C. voltage, itis not recommended that a voltmeter be used to checktoggle switch operation.1. Inspect the toggle switch for correct wiring.2. Isolate the toggle switch by disconnecting allwires from the switch, or by disconnecting theMolex connector from the control board.3. Check across the toggle switch terminals using acalibrated ohmmeter. Note where the wirenumbers are connected to the switch terminals, orrefer to the wiring diagram to take properreadings.172 Part Number 80-01111-9 7/10