Manitowoc

Safety Limit Notes• A safety limit indication is completed before thewater pump starts. Water contacting the icethickness probe in the freeze cycle will cause theharvest light to flash. Do not mistake a harvest lightflashing in the freeze cycle with a safety limitindication.• A continuous run of 100 harvests automaticallyerases the safety limit code.• The control board will store and indicate only onesafety limit – the last one exceeded.• If the toggle switch is moved to the OFF positionand then back to the ON position prior to reachingthe 100-harvest point, the last safety limitexceeded will be indicated.• If the harvest light did not flash prior to the icemachine restarting, then the ice machine did notstop because it exceeded a safety limit.110 Part Number 80-01111-9 7/10