Torque at its best. - Gustav Klauke GmbH
Torque at its best. - Gustav Klauke GmbH
Torque at its best. - Gustav Klauke GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.klauke.com<strong>Torque</strong> <strong>at</strong> <strong>its</strong> <strong>best</strong>.Fully insul<strong>at</strong>ed VDE <strong>Torque</strong> Wrenchwith r<strong>at</strong>chet.VDE Compact <strong>Torque</strong> Wrench
VDE Compact <strong>Torque</strong> WrenchFully insul<strong>at</strong>ed VDE <strong>Torque</strong> Wrench with r<strong>at</strong>chetThe fully insul<strong>at</strong>ed torque wrench with autom<strong>at</strong>ic release convinces every time when things get tough.Whether it’s getting precarious or tight or whether quality is required – with the<strong>Klauke</strong> torque wrench with 3/8“ and 1/2“ drive a space saving tool is <strong>at</strong> hand whichprovides safe electrical connections everywhere.Audible and noticable buckleof the r<strong>at</strong>chet headAutom<strong>at</strong>ic release once the settorque value has been reachedAssured by the two coloured multi-layer insul<strong>at</strong>ionClearly arranged display with Nm scaleEasy to adjust the torque value <strong>at</strong> the rotary handlePrecise ± 4% release accuracy
<strong>Klauke</strong> tools get the hang of it'. As soon as the set torque value has been reached the torque wrench releasesautom<strong>at</strong>ically and you can rely on consistent quality standards. In addition the release accuracy of ± 4% andthe calibr<strong>at</strong>ion certific<strong>at</strong>e assure ISO certified oper<strong>at</strong>ing cycles <strong>at</strong> all times.It’s 100% quality Made in Germany!Highlights• Small install<strong>at</strong>ion size for vers<strong>at</strong>ile applic<strong>at</strong>ion (for instance in cable trenches and hard to reach areas)• Autom<strong>at</strong>ic release once set torque value is reached• Built in r<strong>at</strong>chet for right and left hand oper<strong>at</strong>ion• Friction locked interlocking system <strong>at</strong> the square with a withdrawal force up to 50 Nm (EC/IEC60900:2004)• <strong>Torque</strong> range 5 – 25 Nm• Fixing and alarm value <strong>at</strong> the turning handle without any additional setting tools• Quick meter reading of values on the clearly arranged scale• Threshold value of the ± 4% accuracy per ISO 6789:2003• Calibr<strong>at</strong>ion certific<strong>at</strong>ion and serial number• Safety by two coloured multi-layer insul<strong>at</strong>ion per DIN – VDE/EN 60900:2004> www.klauke.comKL1000IS12NM25KL1000IS38NM25
Hand ToolsInsul<strong>at</strong>ed Hand ToolsKTool set, 1/2", pcs., multilayer insul<strong>at</strong>ionsuitable for:K General live workingCharacteristicsK Fully insul<strong>at</strong>ed acc. to EN 609000K 2 colour dipped insul<strong>at</strong>ion – outside orange, inside yellowK Vanadium special steel acc. to DIN 7448ArticleTool set, 20 pcs., multilayer insul<strong>at</strong>ionScope of supplyReversible r<strong>at</strong>chet, 1/2" drive, KLEMMFIXT-handle, 1/2" driveExtension bar 1/2" drive, 250 mmExtension bar 1/2" drive, 125 mmSocket 1/2" drive, 10 mmSocket 1/2" drive, 11 mmSocket 1/2" drive, 12 mmSocket 1/2" drive, 13 mmSocket 1/2" drive, 14 mmSocket 1/2" drive, 17 mmSocket 1/2" drive, 19 mmSocket 1/2" drive, 22 mmSocket 1/2" drive, 24 mmScrewdriver bit socket for slotted screws, 1/2" drive, 5.5 mmScrewdriver bit socket for PH 2 screws, 1/2" driveScrewdriver bit socket for plus/minus screws 2VDE Cable knifeVDE Side cutter 180 mmVDE Slotted screwdriver 100x3.5x6.0 mmVDE Slotted screwdriver 125x5.5x1.0 mmCasePart No.KL1300IS12B20Part No.KL1000IS12KL1299IS12KL1290IS12250KL1290IS12125KL1240IS1210KL1240IS1211KL1240IS1212KL1240IS1213KL1240IS1214KL1240IS1217KL1240IS1219KL1240IS1222KL1240IS1224KL1200IS1255KL1210IS12PH2KL1230IS12PM2KL640GKKL040180ISKL10010035ISKL10012555ISCaseKFully insul<strong>at</strong>ed Open end spannersuitable for:K Hexagonal screwsCharacteristicsK Fully insul<strong>at</strong>ed acc. to EN 60900K 2 colour dipped insul<strong>at</strong>ion – outside orange, inside yellowK Vanadium special steel acc. to DIN 7448ArticleFully insul<strong>at</strong>ed open end spanner SW 6Fully insul<strong>at</strong>ed open end spanner SW 7Fully insul<strong>at</strong>ed open end spanner SW 8Fully insul<strong>at</strong>ed open end spanner SW 10Fully insul<strong>at</strong>ed open end spanner SW 11Fully insul<strong>at</strong>ed open end spanner SW 12Fully insul<strong>at</strong>ed open end spanner SW 13Fully insul<strong>at</strong>ed open end spanner SW 17Fully insul<strong>at</strong>ed open end spanner SW 19Fully insul<strong>at</strong>ed open end spanner SW 22Part No.KL11000IS6KL11000IS7KL11000IS8KL11000IS10KL11000IS11KL11000IS12KL11000IS13KL11000IS17KL11000IS19KL11000IS224
Hand ToolsInsul<strong>at</strong>ed Hand ToolsKTORQUE WRENCH COMPACT3/8'' or 1/2" DRIVE 5 - 25 NMCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK with autom<strong>at</strong>ic releaseK including reversible r<strong>at</strong>chet handleK Friction locked interlocking system <strong>at</strong> the square with a withdrawal force up to 50 NmK Autom<strong>at</strong>ic release once the set torque value has been reachedK Quick meter reading of values <strong>at</strong> clearly arranged scaleK Precise +/- 4% release accuracyK Small install<strong>at</strong>ion size (appr. 210mm) for vers<strong>at</strong>ile applic<strong>at</strong>ionArticlePart No.TORQUE WRENCH COMPACT 3/8" DRIVE 5 - 25 NMKL1000IS38NM25TORQUE WRENCH COMPACT 1/2" DRIVE 5 - 25 NMKL1000IS12NM25K TORQUE WRENCH3/8" or 1/2" DRIVEsuitable for:K <strong>Torque</strong>s 2 - 27 NM / 5 - 50 NMK 3/8"or 1/2" mountingCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK with autom<strong>at</strong>ic releaseK including reversible r<strong>at</strong>chet handleArticleTORQUE WRENCH 3/8" DRIVE 2 - 27 NMTORQUE WRENCH 3/8" DRIVE 5 - 50 NMTORQUE WRENCH 1/2" DRIVE 2 - 27 NMTORQUE WRENCH 1/2" DRIVE 5 - 50 NMPart No.KL1000IS38NM27KL1000IS38NM50KL1000IS12NM27KL1000IS12NM50K REVERSIBLE RATCHET HANDLE SQUARE DRIVE3/8'' or 1/2" DRIVEsuitable for:K For hand oper<strong>at</strong>ed socketsK One hand oper<strong>at</strong>ionCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK Chrome vanadium steelArticleREVERSIBLE RATCHET HANDLE 3/8" DRIVEREVERSIBLE RATCHET HANDLE 1/2" DRIVEK T-SOCKET WRENCH3/8'' or 1/2" DRIVEsuitable for:K For hand oper<strong>at</strong>ed socketsCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK Chrome vanadium steelArticleT-SOCKET WRENCH 3/8" DRIVET-SOCKET WRENCH 1/2" DRIVEPart No.KL1000IS38KL1000IS12Part No.KL1299IS38KL1299IS125
Hand ToolsInsul<strong>at</strong>ed Hand ToolsKEXTENSION 3/8" OR 1/2" DRIVE125 OR 250 MM LONGsuitable for:K All inserts available with 3/8" or 1/2" driveCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK Chrome vanadium steelArticlePart No.EXTENSION 3/8" DRIVE X 125 MM LONGKL1290IS38125EXTENSION 3/8" DRIVE X 250 MM LONGKL1290IS38250EXTENSION 1/2" DRIVE X 125 MM LONGKL1290IS12125EXTENSION 1/2" DRIVE X 250 MM LONGKL1290IS12250KSOCKET 3/8" DRIVEsuitable for:K HEX. HEAD SCREWSCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK DIN 7448 made from special vanadium steelArticleSOCKET 3/8" DRIVE SW 10 MMSOCKET 3/8" DRIVE SW 11 MMSOCKET 3/8" DRIVE SW 12 MMSOCKET 3/8" DRIVE SW 13 MMSOCKET 3/8" DRIVE SW 14 MMSOCKET 3/8" DRIVE SW 17 MMSOCKET 3/8" DRIVE SW 19 MMPart No.KL1240IS3810KL1240IS3811KL1240IS3812KL1240IS3813KL1240IS3814KL1240IS3817KL1240IS3819KSOCKET 1/2" DRIVEsuitable for:K HEX. HEAD SCREWSCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK DIN 7448 made from special vanadium steelArticleSOCKET 1/2" DRIVE SW 10 MMSOCKET 1/2" DRIVE SW 11 MMSOCKET 1/2" DRIVE SW 12 MMSOCKET 1/2" DRIVE SW 13 MMSOCKET 1/2" DRIVE SW 14 MMSOCKET 1/2" DRIVE SW 16 MMSOCKET 1/2" DRIVE SW 17 MMSOCKET 1/2" DRIVE SW 19 MMSOCKET 1/2" DRIVE SW 22 MMSOCKET 1/2" DRIVE SW 24 MMSOCKET 1/2" DRIVE SW 27 MMPart No.KL1240IS1210KL1240IS1211KL1240IS1212KL1240IS1213KL1240IS1214KL1240IS1216KL1240IS1217KL1240IS1219KL1240IS1222KL1240IS1224KL1240IS12276
Hand ToolsInsul<strong>at</strong>ed Hand ToolsK SOCKET 3/8" OR 1/2'' DRIVEsuitable for:ALLEN KEYCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK DIN 7448 made from special vanadium steelArticleSOCKET 3/8" DRIVE FOR ALLEN KEY SW 4 MMSOCKET 3/8" DRIVE FOR ALLEN KEY SW 5 MMSOCKET 3/8" DRIVE FOR ALLEN KEY SW 6 MMSOCKET 3/8" DRIVE FOR ALLEN KEY SW 8 MMSOCKET 1/2" DRIVE FOR ALLEN KEY SW 4 MMSOCKET 1/2" DRIVE FOR ALLEN KEY SW 5 MMSOCKET 1/2" DRIVE FOR ALLEN KEY SW 6 MMSOCKET 1/2" DRIVE FOR ALLEN KEY SW 8 MMPart No.KL1260IS38I4KL1260IS38I5KL1260IS38I6KL1260IS38I8KL1260IS12I4KL1260IS12I5KL1260IS12I6KL1260IS12I8KSOCKET 3/8" OR 1/2" DRIVEsuitable for:K PLUS/MINUS PM SCREWSCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK DIN 7448 made from special vanadium steelArticleSOCKET 3/8" DRIVE FOR PLUS/MINUS PM1SOCKET 3/8" DRIVE FOR PLUS/MINUS PM2SOCKET 3/8" DRIVE FOR PLUS/MINUS PM3SOCKET 1/2" DRIVE FOR PLUS/MINUS PM1SOCKET 1/2" DRIVE FOR PLUS/MINUS PM2SOCKET 1/2" DRIVE FOR PLUS/MINUS PM3KSOCKET 3/8" OR 1/2'' DRIVEsuitable for:K SLOT 5.5CharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK DIN 7448 made from special vanadium steelArticleSOCKET 3/8" DRIVE FOR SLOTTED SCREWS 5.5SOCKET 1/2" DRIVE FOR SLOTTED SCREWS 5.5Part No.KL1230IS38PM1KL1230IS38PM2KL1230IS38PM3KL1230IS12PM1KL1230IS12PM2KL1230IS12PM3Part No.KL1200IS3855KL1200IS1255K SOCKET 3/8" OR 1/2'' DRIVEsuitable for:K PHILIPS PH2 SCREWSCharacteristicsK fully insul<strong>at</strong>ed to EN60900K 2-colour dipped insul<strong>at</strong>ion – outside orange/inside yellowK DIN 7448 made from special vanadium steelArticlePart No.SOCKET 3/8" DRIVE FOR PHILIPS PH2KL1210IS38PH2SOCKET 1/2" DRIVE FOR PHILIPS PH2KL1210IS12PH27
Strong brands for your success:<strong>Gustav</strong> <strong>Klauke</strong> <strong>GmbH</strong>Auf dem Knapp 46D-42855 RemscheidPhone: +49 (0) 2191 / 907 - 0Fax: +49 (0) 2191 / 907 - 205E-Mail: info@klauke.textron.comInternet: www.klauke.comTechnische Änderungen vorbehalten. BRVIWZ12GB 5.000 04/12 III
Change language