to download - Electric Motor Service

DELCO PG260L SERIESWAI No. Description7-1044 SOLENOID (4-Term., Accurate)7-1044-3T SOLENOID (3-Term., Accurate)8-201 NEEDLE BEARING - D.E.(12mm ID x 16mm OD x 10mm W)51-1125 D.E. HOUSING (10mm Pad Mtg., Straight)51-1128-1 D.E. HOUSING (10mm Pad Mtg., Staggered)51-1140 D.E. HOUSING (9mm 2-Ear Flg. Mtg.)51-1141 D.E. HOUSING (M12 x 1.75, 13mm 2-Ear Flg. Mtg.)51-1142 D.E. HOUSING (11mm 2-Ear Flg. Mtg.)51-1143 D.E. HOUSING (10mm Pad Mtg., Staggered)51-1144 D.E. HOUSING (10mm Pad Mtg., Straight)51-1156 D.E. HOUSING (11mm 2-Ear Flg. Mtg.)52-140 C.E. FRAME52-141 C.E. FRAME54-173 STARTER DRIVE (9-T, CW, 6-SPL, 25.5mm Gear OD)54-173-1 STARTER DRIVE (9-T, CW, 6-SPL, 25.5mm Gear OD)54-174 STARTER DRIVE (11-T, CW, 6-SPL)55-120 SHIFT LEVER57-1231 FIELD CASE ASSY. (w/ Drain Notch)57-1232 FIELD CASE ASSY. (w/ Drain Notch)57-1233 FIELD CASE ASSY. (w/ Drain Notch)57-1234 FIELD CASE ASSY. - Marine Applications(wo/ Drain Notch)61-149 ARMATURE (139mm OAL, 11-SPL)62-1306 BUSHING - C.E.(10.08mm ID x 12.75mm OD x 11.5mm L)62-1307 BUSHING - Planetary Shaft(9.83mm ID x 16.65mm OD x 8.02mm L)62-1806 BUSHING - Stationary Gear(22.28mm ID x 26.73mm OD x 5.5mm L)66-132-2 SOLENOID (3-Terms.)66-132-4 SOLENOID (3-Terms., Latest OE Vented Design)66-133-2 SOLENOID (4-Term.)68-149 BRUSH - Field68-150 BRUSH - Grd.69-121 BRUSH HOLDER ASSY.71-1115 SEAL - Stationary Gear71-1338 PLUG - Shift Lever Support76-1116 COVER - Planetary Gear76-1313* CAP - C.E.76-1314 PIVOT PAD - Shift Lever76-1800 STOP COLLAR (12mm ID x 17.3mm OD)76-1800-1 STOP COLLAR (12mm ID, Mfd. By OE Supplier)76-1801 RETAINING RING - Stop Collar (7/16 ID)76-1866-1* SPACER - Planetary Shaft76-1874-1 PLANETARY GEAR (16-Teeth, 20.5mm Gear OD)76-1875 PLANETARY SHAFT76-1876-1 STATIONARY GEAR (43-Teeth)85-1216 SCREW - Solenoid (M4 x 0.7 x 22.5mm L, E5 Torx,Thd. Form.)85-1357 THRU BOLT (M5 x 0.8 x 151mm L)85-1360 THRU BOLT(M5 x 0.8 x 151mm L w/ 10-24 x 7/16 L Ext.)85-1365 SCREW - Brush Holder Assy. (M5 x 0.8 x 9mm L,E6 Torx)85-1507 BOLT - D.E. Mtg. (M10 x 1.5 x 113mm L)85-2401 HEX NUT - Soln. Batt., Motor Terms.(M8 x 1.25 x 13mm F x 5mm T)85-9401 LOCK WASHER - Batt., Motor Terms. (8mm ID, Conical)*Under DevelopmentDELCO PG260L SERIES73