to download - Electric Motor Service

DELCO PG260G SERIESWAI No. Description7-1044 SOLENOID (4-Term., Accurate)7-1044-3T SOLENOID (3-Term., Accurate)8-201 NEEDLE BEARING - D.E.(12mm ID x 16mm OD x 10mm W)51-1135 D.E. HOUSING (10mm Pad Mtg., Staggered)51-1136 D.E. HOUSING (10mm Pad Mtg., Straight)51-1139 D.E. HOUSING (10mm Pad Mtg., Staggered)52-139 C.E. FRAME - Used w/ M4 BH Screws52-142 C.E. FRAME - Used w/ M5 BH Screws52-143 C.E. FRAME - Used w/ M4 BH Screws54-174 STARTER DRIVE (11-T, CW, 6-SPL)55-120 SHIFT LEVER57-1230 FIELD CASE ASSY.61-148 ARMATURE (123mm OAL, 11-SPL)62-1307 BUSHING - Planetary Shaft(9.83mm ID x 16.65mm OD x 8.02mm L)62-1308* BUSHING - C.E.(10.08mm ID x 12.80mm OD x 11.4mm L)62-1806 BUSHING - Stationary Gear(22.28mm ID x 26.73mm OD x 5.5mm L)66-132-2 SOLENOID (3-Terms.)66-132-4 SOLENOID (3-Terms., Latest OE Vented Design)66-133-2 SOLENOID (4-Term.)68-140 BRUSH69-113 BRUSH HOLDER ASSY. (40mm LL, w/ Brushes)69-113-1 BRUSH HOLDER ASSY. (40mm LL, w/ Brushes)69-120 BRUSH HOLDER ASSY.(83mm LL, M4 x 0.7 Brush Screw Holes)69-122 BRUSH HOLDER ASSY.(71mm LL, M5 x 0.8 Brush Screw Holes)69-123 BRUSH HOLDER ASSY.(57mm LL, M5 x 0.8 Brush Screw Holes)69-1710 BRUSH SPRING71-1117 SEAL - Stationary Gear71-1338 PLUG - Shift Lever Support76-1118 COVER - Planetary Shaft Assy.76-1313* CAP - C.E.76-1314 PIVOT PAD - Shift Lever76-1800 STOP COLLAR (12mm ID x 17.3mm OD)76-1800-1 STOP COLLAR (12mm ID, Mfd. By OE Supplier)76-1801 RETAINING RING - Stop Collar (7/16 ID)76-1866-1* SPACER - Planetary Shaft76-1874-1 PLANETARY GEAR (16-Teeth, 20.5mm Gear OD)76-1875 PLANETARY SHAFT76-1876-1 STATIONARY GEAR (43-Teeth)85-1204 SCREW - Brush Holder Assy. (M4 x 0.7 x 10mm L, Hex)85-1216 SCREW - Solenoid (M4 x 0.7 x 22.5mm L, E5 Torx,Thd. Form.)85-1355 THRU BOLT (M6 x 1.0 x 115mm L)85-1358 THRU BOLT (M6 x 1.0 x 115mm L w/ 10-24 x 7/16 L Ext.)85-1365 SCREW - Brush Holder Assy. (M5 x 0.8 x 9mm L,E6 Torx)85-1507 BOLT - D.E. Mtg. (M10 x 1.5 x 113mm L)85-2401 HEX NUT - Soln. Batt., Motor Terms.(M8 x 1.25 x 13mm F x 5mm T)85-9401 LOCK WASHER - Batt., Motor Terms. (8mm ID, Conical)*Under DevelopmentDELCO PG260G SERIES71