to download - Electric Motor Service

SHOP SUPPLIES (89-)PACKAGINGMiscellaneous PackagingHARDWARE, SHOP SUPPLIES89-900Spacer - PackagingFor: Delco 20SI, 21SI, 22SI, 23SI, 25SI,26SI, 27SI/Type 200, 29SI, 30SI SeriesIR/EF AlternatorsDim: 25mm ID x 31mm OD x 38mm LNote: Paper-tube used to secure fanwhen testing & packaging heavy-dutyDelco alternators wo/ pulley.89-901Spacer - PackagingFor: Ford 1G Series Truck 65-90A, 1GSeries Blue Back Truck 75-90A ER/EFAlternatorsDim: 22.4mm ID x 25.4mm OD x 19mm LNote: Paper-tube used to secure fanwhen testing & packaging alternators wo/pulley.89-902Spacer - PackagingFor: Delco 10SI, 12SI, 15SI, 17SI,27SI/Type 100, CS121, CS130, CS144Series IR/EF Alternators; Ford 1G SeriesER/EF, 2G Series IR/EF, 3G Series IR/IFAlternatorsDim: 19mm ID x 22.4mm OD x 19mm LNote: Paper-tube used to secure fanwhen testing & packaging alternators wo/pulley. For metal version use 46-2602.89-906Cardboard TubeFor: Delco 37MT, 40MT, 42MT SeriesDD StartersNote: Prevents battery post from puncturingend of box. Included in 89-103starter box kit.89-907Brush RetainerFor: Delco 5MT, SD200, SD250 SeriesDD StartersDim: 44.5mm (1-3/4") ODNote: Used to secure brushes in fieldcase assy. during handling and installation.89-913Caution TagFor: Delco 21SI, 22SI, 27SI/Type 200Alternators wo/ PulleyNote: When alternators do not have thepulley installed, the rotor is free to move.This allows the slip ring to contact theS.R.E. frame. If the pulley is installed withthe unit in the vertical position, the slipring may be pushed back and groundedagainst the rotor pole piece.Features:• Cautions the installer to remove pulleynut with the unit in horizontal positiononly89-914Brush RetainerFor: Delco AD230, AD237, AD244,CS130D Series IR/IF AlternatorsNote: Used in 39-109 brush holderassys.89-903Nylon Wire TieDim: 4" OAL, 15/16" Max. Bundle Dia.696