to download - Electric Motor Service

STARTER - SOLENOIDS (7- ACCURATE, 66- WAI)(cont'd.)Features:• Accurate• Copper contact terminals• Insulated base w/ steel housing(cont'd.)Features:• Accurate• No heat is generated because the coil is taken out of the circuit• Requires less than 3.5 amps to operate• Compact, mounts in tight locations• Insulated w/ plated steel housing7-1055Solenoid12 Volt, 3-TerminalUsed On: Western Snow PlowReplaces: Cole Hersee 24077; Ford 59B-11450;United Technologies SO-51179, Western 25634Dim:2) 5/16-24 Contact Terms.1) 10-32 TerminalNote: Curved mounting bracket.Mounting holes: 5/16 x 19/32, 2-13/16 on centers.Features:• Accurate• Copper contact terminals• Insulated base w/ plastic coated steel housing• Encased plastic covering protects against weather & dirt7-1062Solenoid12 Volt, 4-Terminal, Latching Solenoid,Continuous DutyUsed On: Agricultural, Industrial & Truck Applications requiring aremote Disconnect Battery Switch or remotely operated BatteryIsolatorReplaces: Cole Hersee 24200Dim:2) 5/16-24 Terminal2) 10-32 TerminalNote: Flat mounting bracket.Mounting holes: 5/16 x 19/32, 2-13/64 on centers.110 amps continuous (carry only).Remotely Operated Battery Isolator: can be used to isolate onebattery from another in a two battery system and prevent batterypower loss or drain. 7-1062 will not produce voltage drop typicallyassociated with battery isolators because of itselectro-mechanical characteristics (not relying on diodes) to performthe isolating function. In this application 7-1062 is used inconjunction with a momentary switch.Remote Battery Disconnect Switch: can be used as a battery disconnectswitch where vehicle wiring constraints do not allow forthe location of heavy gauge wire. In this application 7-1062 isused in conjunction with a momentary switch located on a panelor dash.(cont'd.)STARTER - SOLENOIDS & SWITCHES511