to download - Electric Motor Service

DIMENSION REFERENCE GUIDEBALL BEARINGS & ROLLER BEARINGSIDWODWIDID = Inside DiameterOD = Outside DiameterW = WidthODBRUSHESDLLLLLTLWWLLLTD = Brush DiameterL = Brush LengthLL = Lead LengthT = Brush Thickness*W = Brush Width**Thickness vs width: thickness will always bethe smaller dimension.BUSHINGSFIELD COILSIDLODID = Inside DiameterOD = Outside DiameterL = LengthHT(Height)HT = Height of pole shoe openingW = Width of pole shoe openingSTARTER DRIVESW(Width)CWCCWChamferRootDia.IDT= No. of TeethSPL= No. of SplinesBarrelODGearODToothLengthLength between Shift LeverEngagement and Pinion EndLCW = Clockwise RotationCCW = Counter Clockwise RotationGear OD = Outside Diameter of pinion gearID = Inside Diameter for armature shaftL = Overall LengthT = Number of pinion gear teethSPL = Number of splines mating with armatureSOLENOID SWITCHESLeft Hand(LH)Battery Terminal12:00 PositionRight Hand(RH)Location of the Switch or Relay TerminalsReferences to the location of the switch or relay terminals are made viewing thefront of the solenoid cap with the battery terminal at the 12:00 clock positionand the motor terminal at the 6:00 clock position.RH = Right Hand; LH = Left HandMotor Terminal6:00 PositionBattery TerminalLengthLength of Battery TerminalReferences to the length of the battery terminal are measured fromthe end of the battery terminal to the solenoid cap surface.Plunger SlotLengthIX