12.07.2015 Views

Lipoderm® Liquor SA - Prismadye

Lipoderm® Liquor SA - Prismadye

Lipoderm® Liquor SA - Prismadye

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Technical InformationLEATHERTI/P 2592 eDecember 2009 Page 1 of 4Supersedes edition of April 1988www.basf.com/leather® = Registered trademark of BASF SELipoderm ® <strong>Liquor</strong> <strong>SA</strong>Anionic fatliquor for leather and furLipoderm <strong>Liquor</strong> <strong>SA</strong> is a synthetic fatliquor with a high fastness profile, thatcan be used universally.For fatliquoring, Lipoderm <strong>Liquor</strong> <strong>SA</strong> can be combined not only with otheranionic fatliquors, but also with Lipoderm Oil N1 or natural oils. Furthermore,it can also be used as anionic component in combination fatliquors.Areas of applicationChemistryPhysical formCharacteristicsFatliquoring of all kinds of fur and leather, primarily in retanningSulphochlorinated long-chain paraffinsBrownish oil• Anionic• Active content approx. 72 %• pH (100 g/l) approx. 8.5• Pumpable at temperatures above 0 °C• Free of natural fats• Contains neither solvent nor APEO• High light fastness and resistance to heatThe above figures are approximate. A detailed specification is available on request.Shelf life5057 5308This product has a shelf life of at least one year if it is stored in its tightlysealed original packaging at temperatures between 0 °C and 50 °C. Drumsshould be tightly resealed each time material is taken from them, and theircontents should be used up as soon as possible after they have beenopened.• Stir well before use.


TI/P 2592 e December 2009 Page 2 of 4 Lipoderm <strong>Liquor</strong> <strong>SA</strong>PropertiesLipoderm <strong>Liquor</strong> <strong>SA</strong>• Can be diluted with warm or cold water to form fine-particle emulsions,which are resistant to water hardness, acids and bases, as well as tovegetable, synthetic and, to a large extent, also mineral tanning agents.• Can be used in chrome tanning.• Compatible with all the usual anionic retanning agents, dyes and fatliquors• Can be used in combination with the cationic fatliquors in theLipoderm C <strong>Liquor</strong> range (formerly Lipamin ® <strong>Liquor</strong> range) to producecombination fatliquors.• Lipoderm <strong>Liquor</strong> <strong>SA</strong> can disperse up to 100 % of its weight of mineraloil and up to 50 % of its weight of natural fats and oils to form stableemulsions.• Contains no saponifiable ingredients.• Reduces the risk of fatty spew; can eliminate fatty spew.• Is lightfast and therefore especially suitable for white and pale leathers.ApplicationLipoderm <strong>Liquor</strong> <strong>SA</strong> is a universal fatliquoring agent for all types of leather.Before being added to the drum, Lipoderm <strong>Liquor</strong> <strong>SA</strong> is emulsified withwarm water in the ratio 1 : 1 to 1 : 2 and can then be diluted further at will.In combinations with unsulphonated fats and when combination fatliquorsare being produced the cationic proportion should not be larger than theanionic proportion. Combination fatliquors can be prepared either by weighingtogether the undiluted individual components and then diluting with hotwater or by mixing the separately prepared anionic and cationic emulsions.To increase the surface fatliquoring effect, unsulphonated oils orLipoderm Oil N1 can also be used. With the same quantities of pure fat,combination fatliquors produce somewhat softer leathers than purely anionicfatliquors and have proven to be especially effective for leathers that arevacuum dried.


TI/P 2592 e December 2009 Page 3 of 4 Lipoderm <strong>Liquor</strong> <strong>SA</strong>ExampleAll percentages refer to the shaved weight1. Used aloneCattle hide nubuck 4 – 5 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>Sheep and goat lining leather 2 – 8 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>Glove and garment leather 6 – 12 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>2. In combination with unsulphonated fats and oilsBox calf and box side 1 – 3 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>0.3 – 1 % Lipoderm Oil N1Corrected-grain leather 4 – 5 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>1 – 1.5 % Lipoderm Oil N13. In combination with anionic auxiliariesNappa leather 1 – 12 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>1 – 2 % Lipoderm N4. In combination with cationic auxiliariesCorrected-grain leather 4 – 5 % Lipoderm Li quor <strong>SA</strong>(pasted) 1 – 1.5 % Lipoderm Oil N1Acidify to pH 4, replenish0.5 – 1 % Lipoderm C <strong>Liquor</strong> NO or SOCombination fatliquor 2 – 3 % Lipoderm <strong>Liquor</strong> <strong>SA</strong>0.5 – 1 % Lipoderm Oil N12 – 3 % Lipoderm C <strong>Liquor</strong> NOFurther information on the BASF products mentioned in connection withLipoderm <strong>Liquor</strong> <strong>SA</strong> is given in the corresponding technical informationleaflets.The shades of our dyes and pigments are illustrated in special pocket shadecards.Please file this leaflet in your “Wet End” binder, Section 9.


TI/P 2592 e December 2009 Page 4 of 4 Lipoderm <strong>Liquor</strong> <strong>SA</strong>SafetyWhen using this product, the information and advice given in our SafetyData Sheet should be observed. Due attention should also be given to theprecautions necessary for handling chemicals.NoteThe data contained in this publication are based on our current knowledgeand experience. In view of the many factors that may affect processing andapplication of our product, these data do not relieve processors from carryingout their own investigations and tests; neither do these data imply anyguarantee of certain properties, nor the suitability of the product for a specificpurpose. Any descriptions, drawings, photographs, data, proportions,weights, etc. given herein may change without prior information and do notconstitute the agreed contractual quality of the product. It is the responsibilityof the recipient of our products to ensure that any proprietary rights andexisting laws and legislation are observed.December 2009BASF SELeather Chemicals67056 Ludwigshafenwww.basf.com/leather

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!