Vinnolit E 2178 englisch

Product Information® Vinnolit E 2178Emulsion PVC for thermoplasticprocessingBrief Description® Vinnolit E 2178 is a special emulsion polymerwith a high K value for rigid film calendering bythe Luvitherm process.Raw Material PropertiesTypicalValue *UnitDIN EN ISOTest methodISOK-value ca. 78 - 1628-2 1628-2Reduced viscosity ca. 159 ml/g 1628-2 1628-2Apparent bulk density ca. 0,500 g/ml 60 60Particle size distribution:Sieve retention Rretained on 0,063 mm screenretained on 0,250 mm screen< 50< 1%%4610 4610Volatile matter < 0,3 % - 1269* The values given above are typical test results which should be used as a guide only. They do not form the whole or part of aspecification or guarantee.Processing and ApplicationsVinnolit E 2178 in general should be mixedwith typical PVC additives for the Luvithermprocess using standard mixing techniques.Mixtures based on Vinnolit E 2178 are calenderedby the low-temperature (Luvitherm) processto high-quality rigid film.Particularly advantageous are the excellentstretching properties of such films at high productionspeeds.Films based on Vinnolit E 2178 show the followingbenefits:- Excellent mechanical properties, especiallyhigh toughness and tear strength- Low electrostatic charging capability- Glossy surface- Good planarity due to good stretchingcapability- Good solvent resistanceOn account of these properties, VinnolitE 2178 is preferably used for films to makeadhesive tape.® Vinnolit = registered trademark of Vinnolit GmbH & Co. KG, Germany

Product InformationPackaging, Delivery and StorageThe product is supplied in 25-kg bags as wellas in bulk form.Vinnolit E 2178 should be stored dry and awayfrom direct or indirect sources of heat. Pleaseconsult the safety data sheet for informationabout the safety precautions necessary fortransport, storage, blending and processing.General InformationFurther processing information and recommendationscan be obtained from our TechnicalService or our local representatives.The data and recommendations contained in this product informationrepresent the current state of our knowledge and serve as a guide onlyto our products and their potential applications. Therefore, no warrantyof specific properties of the products mentioned herein nor of theirsuitability or fitness for a particular purpose is implied.The information given in this leaflet should be checked by preliminarytrials because of conditions during processing over which we have nocontrol, especially where other companies' raw materials are also used.Patent or other proprietary rights of third parties must be observed. Thequality of our products is warranted under the terms of our GeneralConditions of Sale.Ismaning, February 2013Vinnolit GmbH & Co. KGCarl-Zeiss-Ring 25D-85737 IsmaningTel.: +49 89 96103-0Fax: +49 89 96103-103www.vinnolit.com